Unit of competency Outline
Date retreived
23/07/2026 3:03 PM AWST
23/07/2026 3:03 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Maintain seat and pod electrical and electronic systems
Maintain seat and pod electrical and electronic systems
Unit of competency
National Code
MEA510A
MEA510A
State Code
D4507
D4507
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
17/06/2014
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
17/06/2014
Nominal Hours
30
Description
This unit of competency is part of the Aircraft Life Support and Furnishing Certificate III and IV training pathways. It covers the competencies required for the removal, installation and limited maintenance of seat and pod electrical and electronic systems during the overhaul of seats and pods. This unit is used in workplaces that operate under the airworthiness regulatory systems of the ADF and CASA.
Notes
Elements and Performance Criteria
1. Remove and inspect seat and pod electrical system components
- 1.1. System is rendered safe and prepared in accordance with the applicable maintenance manual to ensure personnel safety
- 1.2. Removal of electrical system components is carried out in accordance with the applicable maintenance manual
- 1.3. Removed components are inspected for visible signs of damage or deterioration in accordance with maintenance manuals and standard enterprise procedures
- 1.4. Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
- 1.5. Removed components are tagged, packaged or discarded in accordance with specified procedures
2. Remove and inspect seat and pod electronic system components
- 2.1. System is rendered safe and prepared in accordance with the applicable maintenance manual to ensure personnel safety
- 2.2. Removal of electronic system components is carried out in accordance with the applicable maintenance manual
- 2.3. Removed components are inspected for visible signs of damage or deterioration in accordance with maintenance manuals and standard enterprise procedures
- 2.4. Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
- 2.5. Removed components are tagged, packaged or discarded in accordance with specified procedures
3. Install seat and pod electrical system components
- 3.1. Electrical system components to be installed are checked to confirm correct part numbers, modification status, serviceability and shelf life
- 3.2. Physical installation of electrical components is carried out in accordance with the applicable maintenance manual
- 3.3. System is reinstated to correct physical condition in preparation for testing
- 3.4. Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
4. Install seat and pod electronic system components
- 4.1. Electronic system components to be installed are checked to confirm correct part numbers, modification status, serviceability and shelf life
- 4.2. Physical installation of electronic components is carried out in accordance with the applicable maintenance manual
- 4.3. System is reinstated to correct physical condition in preparation for testing
- 4.4. Required maintenance documentation is completed and processed in accordance with standard enterprise procedures
5. Functionally test seat and pod electrical and electronic systems
- 5.1. Applicable system test set is connected to seat or pod in accordance with the applicable maintenance manual or approved vendor procedures
- 5.2. Power is applied to the seat or pod in accordance with applicable maintenance manual
- 5.3. Seat or pod electrical system is functionally tested for correct operation in accordance with the applicable maintenance manual
- 5.4. Seat or pod electronic system is functionally tested using the applicable test set in accordance with the applicable maintenance manual
- 5.5. Test equipment is removed and required maintenance documentation is completed and processed in accordance with standard enterprise procedures
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Removal and installation of electrical components
Removal and installation of electrical components involves one or more of the following connection methods:
bolted
plug connectors
Electrical system components
Electrical system components may include:
electrical cables and looms
selectors and switches
motors and actuators
relays, control units and modules
Electronic system components
Electronic system components may include:
display units
tuners/selectors
volume controls
audio headset receptacles
data cables
Visible signs of damage or deterioration
Visible signs of damage or deterioration may include:
broken or chafed wires
corrosion of plugs and connectors
physical damage to components
wear
evidence of electrical or electronic component overheating
Application
Application of this unit may relate to:
scheduled or unscheduled removal and installation of seat and pod electrical and electronic systems and components, and to system functional testing during seat and pod overhaul in workshops
Removal and installation of electrical components
Removal and installation of electrical components involves one or more of the following connection methods:
bolted
plug connectors
Electrical system components
Electrical system components may include:
electrical cables and looms
selectors and switches
motors and actuators
relays, control units and modules
Electronic system components
Electronic system components may include:
display units
tuners/selectors
volume controls
audio headset receptacles
data cables
Visible signs of damage or deterioration
Visible signs of damage or deterioration may include:
broken or chafed wires
corrosion of plugs and connectors
physical damage to components
wear
evidence of electrical or electronic component overheating
Application
Application of this unit may relate to:
scheduled or unscheduled removal and installation of seat and pod electrical and electronic systems and components, and to system functional testing during seat and pod overhaul in workshops
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to apply hand skills, use specialist tools and use maintenance publications to remove and install seat and pod electrical and electronic system components, and to functionally test the systems while observing all relevant safety precautions.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
It is essential that applicable cleanliness requirements and OHS safety precautions are fully observed, including awareness of electrostatic discharge procedures.
Evidence of transferability of skills and knowledge related to removal and installation is essential. An understanding of the attachment methods, connection of hardware and system operation as they relate to the work must be demonstrated before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved on the range of components and tasks listed in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide.
Context of and specific resources for assessment
Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in maintenance manuals. It is also expected that general-purpose tools, test and ground support equipment found in most routine situations would be used where appropriate.
Method of assessment
Guidance information for assessment
Overview of assessment
A person who demonstrates competency in this unit must be able to apply hand skills, use specialist tools and use maintenance publications to remove and install seat and pod electrical and electronic system components, and to functionally test the systems while observing all relevant safety precautions.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
It is essential that applicable cleanliness requirements and OHS safety precautions are fully observed, including awareness of electrostatic discharge procedures.
Evidence of transferability of skills and knowledge related to removal and installation is essential. An understanding of the attachment methods, connection of hardware and system operation as they relate to the work must be demonstrated before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved on the range of components and tasks listed in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide.
Context of and specific resources for assessment
Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in maintenance manuals. It is also expected that general-purpose tools, test and ground support equipment found in most routine situations would be used where appropriate.
Method of assessment
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AUF07 | MEA510 | Maintain seat and pod electrical and electronic systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D747 | MEA41111 | Certificate IV in Aircraft Life Support and Furnishing | Qualification |
| D742 | MEA30311 | Certificate III in Aircraft Life Support and Furnishing | Qualification |