Unit of competency Outline

Date retreived
23/07/2026 12:21 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce single-faced web

Produce single-faced web

Unit of competency
National Code
ICPCBF3050
State Code
OBP46
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030717 - Plant And Machine Operations
Original Release Date
20/08/2020
Nominal Hours
30
Description
This unit describes the skills and knowledge required to produce a single-faced web for corrugated board manufacture, including inspecting and maintaining production quality and identifying and rectifying problems.It applies to individuals who generally work under direct supervision and perform a range of mainly routine tasks such as maintaining, cleaning and shutting down machinery and equipment. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Inspect, sample and adjust quality
  • 1.1 Organise inspection and/or testing of sample
  • 1.2 Inspect and test sample as required according to enterprise procedures
  • 1.3 Interpret results and make adjustments according to product and machine specifications as required
2. Maintain operation of reel transportation system and single facing process
  • 2.1 Review and adjust reel stand and web control system according to work health and safety (WHS) requirements
  • 2.2 Add substrate to the process according to job specifications
  • 2.3 Check and adjust starch, heat and steam delivery systems
  • 2.4 Review and adjust corrugating roll and pressure rolls
3. Maintain in-line process(es)
  • 3.1 Monitor and adjust coating and waxing units
  • 3.2 Observe and adjust slitters and cut-off knife
4. Maintain production process
  • 4.1 Use machine controls as required
  • 4.2 Monitor and verify performance using the process control system
  • 4.3 Review and adjust starch performance throughout production run
  • 4.4 Conduct quality checks on a regular basis and adjust as required
  • 4.5 Report process adjustments to eliminate problems according to enterprise procedures
5. Identify and rectify problems
  • 5.1 Identify and report problems in machine operation according to enterprise procedures
  • 5.2 Carry out adjustments or corrections according to specified procedures, and within scope of own role
  • 5.3 Verify repairs and adjustments as required prior to resumption of operations
6. Conduct shutdown of production process
  • 6.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 6.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
  • 6.3 Clean and disengage all required parts of machinery used in printing process
  • 6.4 Complete required production records and enterprise documentation
No information
No information
Replaces
State Code National Code Title Type
AUM74 ICPCBF305 Produce single-faced web Unit of competency