Unit of competency Outline

Date retreived
22/07/2026 4:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Stitch by hand

Stitch by hand

Unit of competency
National Code
MSTTF2012
State Code
BAU57
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
01/12/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to stitch canvas and sail products by hand.The unit of competency applies to standard stitching of damaged seams, gussets, reinforcements, general repairs or modifications, and new work. Work may be conducted in a variety of environments, such as operational indoor or outdoor workplaces or on site.Work may be conducted in small to large scale enterprises and may involve individual and team activities. Work is performed within defined procedures under direct supervision. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to stitch by hand
  • 2.1 Read and interpret workplace procedures and instructions and organise work to maximise safety and productivity
  • 2.2 Clear and clean work area and establish safe working environment
  • 2.3 Seek assistance to move and position work piece, if necessary
  • 2.4 Seek advice on appropriate thread to be used with regard to thread material, diameter of thread, tensile strength and colour
  • 2.5 Seek advice regarding appropriate needle to suit type of thread, type of stitch and material to be sewn
  • 2.6 Check condition of needle to ensure it is sharp, clean and free from rust and dirt
3 Perform hand stitching
  • 3.1 Lay out material on working table or other suitable surface or support in situ in preparation for stitching process
  • 3.2 Choose appropriate type of stitch to suit the particular application
  • 3.3 Start stitching properly and perform hand stitching according to specifications
  • 3.4 Tie off last stitch, cut thread and inspect finished work to ensure it conforms to specification
4 Check quality and finalise work
  • 4.1 Inspect completed work to verify that it meets job specifications and relevant workplace and industry quality standards
  • 4.2 Identify and mark any areas in need of re-work or rectification, perform re-work or arrange appropriate action
  • 4.3 Label or tag completed product and complete any necessary documentation in accordance with workplace procedures
  • 4.4 Store needles and threads in a dry and safe place and dispose of worn or damaged needles in accordance with manufacturer recommendations and workplace procedures
  • 4.5 Clean work area and place tools back in storage
No information
No information
Replaces
State Code National Code Title Type
W7471 LMTTF2012A Stitch by hand Unit of competency
Replaced By
State Code National Code Title Type
OEZ34 MSTTF2021 Stitch by hand Unit of competency