Unit of competency Outline
Date retreived
22/07/2026 1:12 AM AWST
22/07/2026 1:12 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Apply computer aided modelling and data management techniques to mechatronic engineering designs
Apply computer aided modelling and data management techniques to mechatronic engineering designs
Unit of competency
National Code
MEM09152A
MEM09152A
State Code
W5414
W5414
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
23/10/2006
Field of Education
030101 - Manufacturing Engineering
Original Release Date
23/10/2006
Nominal Hours
40
Description
This unit covers applying CAD modelling and data management techniques to the design of mechatronic and maintenance engineering products, processes, systems or services.Mechatronics is usually defined as the integration of mechanical, electronics, programming, electrical and fluid power in an automated engineering product.
Notes
Elements and Performance Criteria
1. Clarify product, process, system or service design requirements
- 1.1. The design specification of the required product, process, system or service is discussed and clarified with the client and design team.
2. Produce the initial product, process, system or service CAD model
- 2.1. CAD modelling and data management techniques are applied to suit given task.
- 2.2. The initial CAD model and graphical representation satisfies the design specification, manufacturing and operational requirements, safety, environmental and related standards.
- 2.3. Engineering calculations are made and engineering references, standards and codes used appropriately to determine design parameters for the model.
- 2.4. Initial design model identifies materials, manufacturing methods and processes.
- 2.5. Initial design model provides for assembly and system form, fit, functional, load, service life and maintainability requirements.
- 2.6. Initial production graphics, specifications and instructions are prepared in accordance with the agreed design concept and organisational requirements using organisation standards.
- 2.7. The CAD software is appropriately customised to suit task requirements.
- 2.8. The CAD generated data is managed and distributed according to organisation protocols and access privileges, contractual or agreed client requirements.
3. Validate the product, process, system or service model
- 3.1. The suitability of the product, process, system or service design model and graphical representation is confirmed with the client, other team members and interested parties.
4. Develop, validate, implement and file model data, production graphics and specifications and procedural documentation
- 4.1. Production model and graphics, specifications and instructions for the product, process, system or service are prepared in accordance with the agreed design concept and organisational requirements and incorporate feedback on initial design graphics.
- 4.2. The production model or graphics, specifications and instructions for the product, process, system or service are checked with the client, design team and other affected persons for suitability prior to implementation.
- 4.3. Implementation installation and commissioning feedback is responded to in accordance with organisational requirements.
- 4.4. The validated production model or graphics, specifications and instructions for the product process, system or service are maintained throughout the implementation, installation and commissioning processes, processed and filed in accordance with organisational requirements.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Modelling and data management techniques
Selection of appropriate modelling software and technique, generating model and data, post processing, generation of annotated 2D images from model, customisation of user environment to organisational standards and customer requirements, incorporation of standard components and library files, use of programming and macros, setting up parametric models, presentation techniques including multimedia using CAD data, transfer and management of data
Graphical representation
Computer aided drafting, drawing and design techniques to relevant Australian and/or ISO standards or equivalent
Production graphics, specifications and instructions
May include those prescribed within the organisation's policies and procedures and those required by relevant statutory regulations and requirements
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Modelling and data management techniques
Selection of appropriate modelling software and technique, generating model and data, post processing, generation of annotated 2D images from model, customisation of user environment to organisational standards and customer requirements, incorporation of standard components and library files, use of programming and macros, setting up parametric models, presentation techniques including multimedia using CAD data, transfer and management of data
Graphical representation
Computer aided drafting, drawing and design techniques to relevant Australian and/or ISO standards or equivalent
Production graphics, specifications and instructions
May include those prescribed within the organisation's policies and procedures and those required by relevant statutory regulations and requirements
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to apply computer aided modelling and data management techniques to a range of mechatronic engineering designs. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with applying computer aided modelling and data management techniques to mechatronic engineering designs or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to apply computer aided modelling and data management techniques to a range of mechatronic engineering designs. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with applying computer aided modelling and data management techniques to mechatronic engineering designs or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WE900 | MEM09156A | Prepare mechatronic models for computer-aided engineering (CAE) | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W249 | MEM60105 | Advanced Diploma of Engineering | Qualification |