Unit of competency Outline

Date retreived
24/07/2026 5:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce architectural precast concrete

Produce architectural precast concrete

Unit of competency
National Code
PMC553050
State Code
BAH20
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030101 - Manufacturing Engineering
Original Release Date
05/08/2016
Nominal Hours
50
Description
This unit of competency covers the skills and knowledge required to produce architectural precast concrete products.This competency applies to operators who are required to prepare mould assemblies, fittings and reinforcement (not pre-stressed); mould, cure and strip the product; and solve problems within area of responsibility. This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The experienced operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare mould for casting
  • 1.1 Check casting schedule, drawings and job specification
  • 1.2 Check finish and veneer requirements for any or all faces, edges or surfaces
  • 1.3 Prepare veneering equipment and formwork to temporarily support veneers and backing concrete
2 Prepare reinforcement
  • 2.1 Check quantities, type, size and shape of reinforcement supplied against drawings and schedules
  • 2.2 Place reinforcement and check concrete covers
  • 2.3 Complete mould assembly
  • 2.4 Insert lifting devices, lugs, fixing and other fittings according to drawings and specifications
  • 2.5 Seal mould
3 Cast concrete
  • 3.1 Ensure that concretes are poured in correct sequence according to work schedule
  • 3.2 Ensure adequate vibration
  • 3.3 Complete casting process to plans and specification
  • 3.4 Prepare test samples/cylinder as required by work instructions
  • 3.5 Screed to a flat, accurate surface in preparation for finishing
  • 3.6 Finish green concrete as required
  • 3.7 Wet patch as required
4 Cure product
  • 4.1 Cover and cure mould in accordance with standard procedure and any special requirements
  • 4.2 Monitor curing to achieve specified stripping strength
5 Strip and store product
  • 5.1 Remove mould parts at appropriate time, with care, and inspect for damage
  • 5.2 Lift unit using appropriate lifting equipment and lifting methods
  • 5.3 Use good work health and safety (WHS) practice
  • 5.4 Arrange storage using protective pads to ensure against damage
6 Respond to problems
  • 6.1 Identify possible routine and non-routine problems in the equipment or process
  • 6.2 Determine problems needing action
  • 6.3 Determine possible fault causes
  • 6.4 Rectify problem using appropriate solution within area of responsibility
  • 6.5 Report problems outside area of responsibility to designated person
7 Control hazards
  • 7.1 Identify hazards from the job to be done
  • 7.2 Identify other hazards in the work area
  • 7.3 Assess the risks arising from those hazards
  • 7.4 Implement measures to control those risks in line with procedures
No information
No information
Replaces
State Code National Code Title Type
WA964 PMC553050C Produce architectural precast concrete Unit of competency
Replaced By
State Code National Code Title Type
OAF97 MSMPMC330 Produce architectural precast concrete Unit of competency