Unit of competency Outline

Date retreived
23/07/2026 3:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Mix live audio

Mix live audio

Unit of competency
National Code
CUASOU401
State Code
WI208
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
15/01/2016
View on TGA
State Implementation and Classification
Approved Date
16/05/2014
Field of Education
100701 - Audio Visual Studies
Original Release Date
16/05/2014
Nominal Hours
140
Description
This unit describes the performance outcomes, skills and knowledge required to mix audio for live shows in the screen, media, entertainment and events industries.Individuals who apply these skills work autonomously in a team environment as they take responsibility for the front of house mix, which involves creating quality sound for audiences. They may also be responsible for supervising others.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for live audio mixing
  • 1.1 Review production documentation and confirm scope of audio mixing requirements with relevant personnel
  • 1.2 Ensure that audio equipment is set up and operational in line with production requirements
  • 1.3 Anticipate problems that could arise during shows and plan accordingly
2. Undertake pre-show operations
  • 2.1 Match interfaces between audio and destination in accordance with level, impedance, phase and frequency
  • 2.2 Line check all inputs and outputs for continuity and patching and route test signals to correct signal paths
  • 2.3 Perform time and phase alignment of audio equipment and adjust as required
  • 2.4 Check that audio levels and controls meet acoustic and dynamic requirements
  • 2.5 Take action to ensure that faults and problems identified during testing are rectified promptly
  • 2.6 Complete audio check and document changes according to organisational requirements
  • 2.7 Operate front of house and monitor consoles during dress rehearsals or sound checks to establish appropriate mix to produce the required technical level, tonal balances and frequency response
  • 2.8 Discuss audio issues with relevant personnel during rehearsals and adjust mix as required
3. Mix audio sources for live shows
  • 3.1 Manage signal control of level, equalisation and dynamic parameters to achieve a balanced sound mix
  • 3.2 Apply effects according to production requirements
  • 3.3 Produce transitions between sound signals that are technically accurate and produce the required effect
  • 3.4 Ensure that the level of the composite signal is within technical limits and desired dynamic range
  • 3.5 Observe and manage sound pressure levels according to venue requirements and safe noise levels
  • 3.6 Resolve audio operational problems with minimal disruption to performances
4. Complete post-show operations
  • 4.1 Execute power down and disassemble equipment safely
  • 4.2 Pack and store equipment and accessories according to safety regulations and production requirements
  • 4.3 Clean work environment after use and restore environment to original condition
  • 4.4 Contribute to evaluations of productions and implement recommendations aimed at improving overall effectiveness of audio operations
  • 4.5 Seek feedback from relevant personnel on own work performance and note areas for improvement
No information
No information
Replaces
State Code National Code Title Type
D1594 CUESOU04C Mix live audio Unit of competency
Replaced By
State Code National Code Title Type
ODG98 CUASOU421 Mix audio for live productions Unit of competency