Unit of competency Outline

Date retreived
22/07/2026 5:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform Civil Drafting

Perform Civil Drafting

Unit of competency
National Code
UEPMNT419A
State Code
S5128
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
07/11/2006
View on TGA
State Implementation and Classification
Approved Date
14/06/2013
Field of Education
030903 - Structural Engineering
Original Release Date
14/06/2013
Nominal Hours
80
Description
1)
This unit deals with the skills and knowledge required to perform the drafting and use of drawing equipment as applied to the production of sectional, arrangement, schematic and plan drawings.
Notes
Elements and Performance Criteria
1 Prepare for drafting
  • 1.1 Work requirements are identified from request/work orders or equivalent and clarified/confirmed with appropriate parties or by site inspection
  • 1.2 Occupational Health and Safety standards, statutory requirements, relevant Australian standards, codes of practice, manufacturers' specifications, environmental requirements and enterprise procedures are identified, applied and monitored throughout the work procedure
  • 1.3 Relevant plans, drawings and texts are selected and interpreted in accordance with the work plan
  • 1.4 Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of the on-the-job training
2 Perform civil drafting
  • 2.1 Civil structures and assemblies are drawn using sectional representation in accordance with specification requirements
  • 2.2 Structures drawn to highlight critical features in accordance with specification requirements
  • 2.3 Civil assemblies drawn to highlight critical features in accordance with specification requirements
  • 2.4 Progressive tolerance calculations made to ensure functional operation of civil structures and assemblies
  • 2.5 Dimensions selected to ensure fit of civil components in accordance with specification requirements
  • 2.6 Civil components selected from manufacturer's catalogue to meet specified functions
  • 2.7 Pictorial drawings, such as isometric, produced as requested in accordance with relevant standards
3 Complete the work
  • 3.1 Drawings checked to ensure that assembly is possible in accordance with specification requirements
  • 3.2 Drawings produced, registered and recorded in accordance with instructions/site documentation procedures
  • 3.3 Relevant personnel notified and existing drawings/specification sheets updated as required
No information
No information
Replaces
State Code National Code Title Type
AYF59 UTPNEG146A Perform civil drafting Unit of competency
Replaced By
State Code National Code Title Type
WE278 UEPMNT419B Perform civil drafting Unit of competency
WE403 UEPOPS419B Shut down a steam turbine Unit of competency
No information