Unit of competency Outline

Date retreived
22/07/2026 6:04 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct routine service of electronic locks and locking systems

Conduct routine service of electronic locks and locking systems

Unit of competency
National Code
CPPSEC3044
State Code
OBI89
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/09/2019
View on TGA
State Implementation and Classification
Approved Date
20/05/2020
Field of Education
029901 - Security Science
Original Release Date
20/05/2020
Nominal Hours
20
Description
This unit specifies the skills and knowledge required to conduct routine servicing to maintain a range of electronic locks and locking systems. It includes identifying damage, friction, sticking or component wear, and making required repairs to ensure the correct operation of electronic locks and locking systems.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Licensing, legislative or certification requirements apply to advising on, supplying, installing, maintaining, monitoring, repairing and servicing security equipment in some states and territories. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Prepare to service electronic locks and locking systems.
  • 1.1 Review work instructions to confirm client and site requirements and routine service timeframes.
  • 1.2 Confirm type of electronic lock and locking system to be serviced and specific maintenance requirements in consultation with relevant persons.
  • 1.3 Review and follow workplace policies and procedures including work health and safety (WHS) when carrying out work tasks.
2 Plan and organise work tasks.
  • 2.1 Plan and prioritise work tasks allowing sufficient time to meet work instructions.
  • 2.2 Select and organise required materials, tools and equipment including personal protective equipment and check for safe and correct operation.
  • 2.3 Arrange access to electronic lock and locking system in consultation with relevant persons.
  • 2.4 Identify hazards in the work area and apply risk control measures.
3 Carry out routine service procedures on electronic lock and locking system.
  • 3.1 Use safe work practices when conducting routine service procedures according to WHS requirements.
  • 3.2 Access electronic lock and locking system requiring servicing with minimal disruption to services and others in the work area.
  • 3.3 Inspect and check electronic lock and locking system to identify damage, friction, sticking or component wear.
  • 3.4 Perform routine service procedures on electronic lock and locking system following manufacturers’ instructions and WHS requirements.
  • 3.5 Identify and adjust common faults and replace worn keys to ensure correct operation of electronic lock and locking system.
  • 3.6 Identify complex fault or repair requirements and report to relevant persons for specialist attention.
4 Finalise routine service and complete documentation.
  • 4.1 Check serviced lock and locking system and confirm correct operation.
  • 4.2 Notify completion of work to relevant persons.
  • 4.3 Complete routine service documentation detailing service procedures, repairs undertaken and identified faults according to workplace requirements.
  • 4.4 Check tools and equipment for faults, wear or damage and rectify or report problems.
  • 4.5 Restore work area to original condition and remove waste caused by routine service tasks.
No information
No information
Replaces
State Code National Code Title Type
D1445 CPPSEC3044A Maintain and repair mechanical lock and locking system Unit of competency
State Code National Code Title Type
BEX5 CPP30519 Certificate III in Technical Security Qualification