Unit of competency Outline
Date retreived
22/07/2026 5:40 AM AWST
22/07/2026 5:40 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Inspect fixed wing aircraft automatic flight control systems and components
Inspect fixed wing aircraft automatic flight control systems and components
Unit of competency
National Code
MEA225B
MEA225B
State Code
W8367
W8367
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
22/06/2011
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
22/06/2011
Nominal Hours
40
Description
This unit is part of the Avionic AME Certificate IV training pathways. It covers the competencies required to inspect automatic flight control systems and components of fixed wing aircraft. Where a CASA licensing outcome is sought this unit forms part of the CASA requirement for the granting of the B2 Aircraft Maintenance Engineer Licence under CASR Part 66, in accordance with the licensing provisions in Section 3, Assessment Guidelines
Notes
Elements and Performance Criteria
1. Inspect automatic flight control systems and components.
- 1.1. Isolation tags are checked and aircraft configured for safe system inspection and operation in accordance with the applicable maintenance manual.
- 1.2. Automatic flight control system components are visually or physically checked for external signs of defects in accordance with applicable maintenance manual.
- 1.3. Defects are correctly identified and recorded in accordance with standard enterprise procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Note
Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide.
Automatic flight control systems and components
Automatic flight control systems andcomponents may include automatic pilots and associated integrated systems and components, including:
1. Automatic pilot
2. Flight director
3. Automatic trim
4. Yaw damper
5. Automatic throttle and automatic landing
Application
Application of this unit may relate to:
Scheduled or unscheduled maintenance activities
Individual or team related activities
Procedures and requirements
Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Note
Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide.
Automatic flight control systems and components
Automatic flight control systems andcomponents may include automatic pilots and associated integrated systems and components, including:
1. Automatic pilot
2. Flight director
3. Automatic trim
4. Yaw damper
5. Automatic throttle and automatic landing
Application
Application of this unit may relate to:
Scheduled or unscheduled maintenance activities
Individual or team related activities
Procedures and requirements
Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise
EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to inspect automatic flight control systems and components while observing all relevant safety precautions.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The underlying skills inherent in this unit should be transferable across a range of inspection applications (including the timely involvement of supervisors or other trades) associated with aircraft automatic flight control systems and components. It is essential that cleanliness requirements and safety precautions applicable to the system being maintained are fully observed, understood and complied with. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical.
Evidence of transferability of skills and knowledge related to inspection is essential. This is to be demonstrated through application across a range of aircraft automatic flight control systems and components listed in the Range Statement. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the Unit of Competency are being achieved under routine supervision on at least one item from each of Groups 1 to 4 (Group 5 may be omitted where it is not applicable to the enterprise) listed in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry .
Context of and specific resources for assessment
Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in the maintenance manuals. It is also expected that general and special purpose tools, test and ground support equipment would be used where appropriate.
Method of assessment
Guidance information for assessment
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to inspect automatic flight control systems and components while observing all relevant safety precautions.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The underlying skills inherent in this unit should be transferable across a range of inspection applications (including the timely involvement of supervisors or other trades) associated with aircraft automatic flight control systems and components. It is essential that cleanliness requirements and safety precautions applicable to the system being maintained are fully observed, understood and complied with. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical.
Evidence of transferability of skills and knowledge related to inspection is essential. This is to be demonstrated through application across a range of aircraft automatic flight control systems and components listed in the Range Statement. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.
A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the Unit of Competency are being achieved under routine supervision on at least one item from each of Groups 1 to 4 (Group 5 may be omitted where it is not applicable to the enterprise) listed in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry .
Context of and specific resources for assessment
Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in the maintenance manuals. It is also expected that general and special purpose tools, test and ground support equipment would be used where appropriate.
Method of assessment
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W1096 | MEA225A | Inspect fixed wing aircraft automatic flight control systems and components | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WC002 | MEA225C | Inspect fixed wing aircraft automatic flight control systems and components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W495 | MEA50107 | Diploma of Aeroskills (Avionics) | Qualification |