Unit of competency Outline

Date retreived
23/07/2026 7:21 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct, modify and maintain high vacuum systems

Construct, modify and maintain high vacuum systems

Unit of competency
National Code
MSL965003
State Code
AWO27
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
01/03/2016
View on TGA
State Implementation and Classification
Approved Date
16/08/2016
Field of Education
030399 - Process And Resources Engineering, N.e.c.
Original Release Date
16/08/2016
Nominal Hours
120
Description
This unit of competency covers the ability to construct, monitor, modify and maintain high vacuum systems. Personnel are required to use advanced bench/hand glasswork techniques and equipment to fabricate glass apparatus.This unit of competency is applicable to skilled and experienced scientific glassblowers. They will apply specialised technical knowledge and precise technical skills and considerable planning and judgement in their work.While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked.
Notes
Elements and Performance Criteria
1 Construct high vacuum systems
  • 1.1 Consult with clients regarding design specifications and cost
  • 1.2 Identify or prepare appropriate blueprints, drawings, sketches and designs
  • 1.3 Identify hazards and workplace safety requirements
  • 1.4 Prepare equipment in accordance with job requirements
  • 1.5 Construct and install vacuum apparatus
  • 1.6 Trial and commission vacuum apparatus
  • 1.7 Use leak detection equipment to vacuum check system
  • 1.8 Complete records and file in the reporting system
2 Modify high vacuum systems
  • 2.1 Identify opportunities to improve efficiency of vacuum system
  • 2.2 Use leak detection equipment to vacuum check system
  • 2.3 Identify gaps and deficiencies which limit system's usefulness
  • 2.4 Confirm modification requirements with appropriate personnel
  • 2.5 Modify system to meet requirements
3 Maintain high vacuum systems
  • 3.1 Identify maintenance procedures and appropriate records
  • 3.2 Plan and evaluate maintenance according to appropriate quality standards
  • 3.3 Identify, document and report need for maintenance for faulty or damaged equipment
  • 3.4 Maintain vacuum and associated systems according to standard procedures
  • 3.5 Use leak detection equipment to vacuum check system
4 Monitor and finetune vacuum operation
  • 4.1 Monitor system to determine whether equipment is operating to specification
  • 4.2 Evaluate equipment outputs to determine nature of problem
  • 4.3 Define nature of sub-standard performance clearly
  • 4.4 Fine tune system to restore system to specification
5 Maintain a safe work environment
  • 5.1 Use established safe work practices and personal protective equipment (PPE) to ensure safety of self and other workers
  • 5.2 Minimise the generation of wastes
  • 5.3 Ensure the safe disposal of wastes
  • 5.4 Clean, care for and maintain work area, equipment and tools
  • 5.5 Report any hazards or incidents according to workplace procedures
6 Maintain records
  • 6.1 Record data in accordance with workplace requirements
  • 6.2 Maintain glass apparatus and system equipment logs in accordance with workplace requirements
  • 6.3 Maintain security and confidentiality of workplace information
No information
No information
Replaces
State Code National Code Title Type
WA703 MSL965003A Construct, modify and maintain high vacuum systems Unit of competency