Unit of competency Outline

Date retreived
22/07/2026 8:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply surface coatings by hand

Apply surface coatings by hand

Unit of competency
National Code
MSFFF2008
State Code
WI320
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030117 - Furniture Polishing
Original Release Date
19/06/2014
Nominal Hours
40
Description
This unit of competency covers applying brushable coatings to surfaces by hand.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices
  • 1.2 Characteristics of the surface and the required surface finish are identified from work orders or instructions
  • 1.3 Processing and application techniques, time and safety requirements are identified and used for work planning
  • 1.4 Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work
  • 1.5 Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task
2 Prepare for application of materials
  • 2.1 Surfaces are checked for contamination and correct preparation according to workplace procedures and standards
  • 2.2 Products with surface or other faults are identified and faults repaired as appropriate
  • 2.3 Finishing materials required are identified and prepared for the task
  • 2.4 Trial applications of surface materials are made to check equipment operation, materials consistency and specified surface finish
  • 2.5 Faults are identified and workplace procedures for rectification are followed
3 Apply finishing materials
  • 3.1 Techniques for hand application of materials are identified
  • 3.2 Finishing materials are applied according to job instructions, material manufacturer specifications and workplace procedures
  • 3.3 Finished products are inspected and approved for suitability for further processing
  • 3.4 Products which do not meet quality specifications are refinished or tagged for further investigation
4 Clean work area and maintain equipment
  • 4.1 Equipment used is cleaned and inspected for serviceable condition and stored appropriately
  • 4.2 Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed
  • 4.3 Work area is cleaned and returned to approved condition
  • 4.4 Workplace records are completed
No information
No information
Replaces
State Code National Code Title Type
W8513 LMFFF2008B Apply surface coatings by hand Unit of competency
Replaced By
State Code National Code Title Type
OEL92 MSFFF2016 Apply surface coatings by hand Unit of competency