Unit of competency Outline

Date retreived
22/07/2026 8:08 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install primary ground supports

Install primary ground supports

Unit of competency
National Code
RIICFW303E
State Code
OCX08
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
040301 - Building Science And Technology
Original Release Date
18/06/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to install primary ground support in civil construction. This includes setting out points of support, installing sets and rings, sheet piling and panel and box sets, as well as performing maintenance on primary ground support through inspections, fault identification and implementing adjustments.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install primary ground support
  • 1.1 Obtain, interpret and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to install primary ground supports and confirm work activity is compliant
  • 1.3 Obtain and interpret emergency procedures and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify potential hazards and environmental issues, implement control measures within scope of own role and escalate where required
  • 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Set out and prepare for primary ground support
  • 2.1 Determine requirements for ground support construction according to job requirements
  • 2.2 Identify and implement installation method according to job requirements
  • 2.3 Obtain material required for primary ground support according to job requirements
  • 2.4 Install primary ground support in excavated areas
  • 2.5 Set out position of steel sets and points of support according to job requirements
  • 2.6 Prepare components of ground support according to job requirements
3. Select and install primary ground support
  • 3.1 Select primary ground support system according to job requirements
  • 3.2 Install primary ground support system according to job requirements
4. Perform maintenance on primary ground support
  • 4.1 Conduct daily inspection of primary ground support to confirm system is secure
  • 4.2 Identify faults and perform maintenance on ground supports
  • 4.3 Identify ground faults and perform support rectifications
5. Conduct clean-up activities
  • 5.1 Clear work area and dispose of or recycle materials according to site requirements
  • 5.2 Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements
No information
No information
Replaces
State Code National Code Title Type
WH094 RIICFW303D Install primary ground support Unit of competency
State Code National Code Title Type
BGL0 RII30920 Certificate III in Civil Construction Qualification
BGL6 RII31220 Certificate III in Civil Foundations Qualification