Unit of competency Outline

Date retreived
23/07/2026 4:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Skive leather pieces

Skive leather pieces

Unit of competency
National Code
MSTLG2007
State Code
BAV30
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
01/12/2016
Nominal Hours
60
Description
This unit of competency covers the skills and knowledge required to skive leather pieces by machine, including the use of skiving operations and the determination of the required skiving process.Work may be conducted in small to large scale enterprises and may involve individual and team activities. Work is performed within industry codes, standards and defined procedures, under direct supervision.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare work pieces
  • 2.1 Receive and check work bundle and assess any follow-up action
  • 2.2 Assess quality of received component parts
  • 2.3 Lay out work pieces in the correct sequence in accordance with specifications
3 Set up machine
  • 3.1 Position self to achieve operator comfort and to minimise fatigue
  • 3.2 Clean and check machine in accordance with SOPs
  • 3.3 Select appropriate skiving technique to reflect work specifications
  • 3.4 Follow skive knife sharpening procedures to manufacturer specifications and in accordance with SOPs
  • 3.5 Set up, start up and shut down skiving machine and associated equipment, and carry out basic maintenance following SOPs and safety requirements
4 Perform machine operation
  • 4.1 Position pieces on machine, as appropriate
  • 4.2 Operate skiving machine following SOPs and safety requirements
  • 4.3 Check finished product against specifications
  • 4.4 Check the performance of the machine regularly for signs of faulty operations and take appropriate action
5 Despatch completed work
  • 5.1 Bundle, stack, store or despatch pieces in accordance with workplace requirements
  • 5.2 Record production faults, as required
  • 5.3 Complete records
No information
No information
Replaces
State Code National Code Title Type
W7379 LMTLG2000A Skive leather pieces Unit of competency