Unit of competency Outline

Date retreived
23/07/2026 10:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Provide solutions for uses of materials and thermodynamic effects

Provide solutions for uses of materials and thermodynamic effects

Unit of competency
National Code
UEENEEE060B
State Code
W7852
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
29/07/2011
View on TGA
State Implementation and Classification
Approved Date
01/06/2010
Field of Education
031303 - Electronic Engineering
Original Release Date
01/06/2010
Nominal Hours
90
Description
1)1.1) DescriptorThis unit covers the solution for the appropriate selection and use of materials and thermodynamic effects relative to an engineering problem. It encompasses working safely, problem solving procedures, including using measuring instruments, applying appropriate theorems and providing solutions derived from measurements and calculations and justification for such solutions.
Notes
Elements and Performance Criteria
1 Prepare to provide solutions for the uses of materials and thermodynamics.
  • 1.1 OHS procedures for a given work area are obtained and understood
  • 1.2 OHS risk control work preparation measures and procedures are followed.
  • 1.3 The nature of the problem is obtained from documentation or from work supervisor to establish the scope of work to be undertaken.
  • 1.4 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others.
  • 1.5 Sources of equipment and products that may be required for the work are established in accordance with established procedures.
  • 1.6 Tools, equipment and testing devices necessary for the work are obtained and checked for correct operation and safety.
2 Provide solutions for the uses of materials and thermodynamics.
  • 2.1 OHS risk control work measures and procedures are followed.
  • 2.2 The need to test or measure active systems is determined in strict accordance with OHS requirements and when necessary conducted within established safety procedures
  • 2.3 Systems are checked as being isolated where necessary in strict accordance OHS requirements and procedures
  • 2.4 Established methods are used to solve system problems from measure and calculated values, as they apply to materials and thermodynamics.
  • 2.5 Unexpected situations are dealt with safely and with the approval of an authorised person.
  • 2.6 Problems are solved without damage to apparatus, circuits, the surrounding environment or services and using sustainable energy practices with the minimum waste and rework.
3 Complete work and document solutions to discovered problem.
  • 3.1 OHS work completion risk control measures and procedures are followed.
  • 3.2 Work site is cleaned and made safe in accordance with established procedures.
  • 3.3 Justification for solutions used to solve system problems is documented.
  • 3.4 Work completion is documented and appropriate person(s) notified in accordance with established procedures.
No information
No information
Replaced By
State Code National Code Title Type
WC447 UEENEEE160A Provide engineering solutions for uses of materials and thermodynamic effects Unit of competency
No information