Unit of competency Outline

Date retreived
22/07/2026 3:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair or overhaul aircraft audio and visual systems and reproducers

Repair or overhaul aircraft audio and visual systems and reproducers

Unit of competency
National Code
MEA288
State Code
AUF53
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
31/08/2018
View on TGA
State Implementation and Classification
Approved Date
22/07/2015
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
22/07/2015
Nominal Hours
60
Description
This unit of competency requires application of hand skills and knowledge of component repair and overhaul procedures relating to aircraft analogue and digital passenger entertainment electronic equipment components that are repaired or overhauled in aviation maintenance workshops during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.The unit is part of the Avionic Certificate IV (Component Workshop Maintenance Stream) training pathway. The unit is used in workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation safety Authority (CASA).
Notes
Elements and Performance Criteria
1. Determine requirements
  • 1.1 Audio and video system and reproducer component defect reports (removal tags) or customer order are correctly interpreted and matched by part and serial numbers
  • 1.2 Circuitry is correctly prepared and connected to the applicable test equipment and is functionally tested or cycled through the prescribed test procedures in accordance with the maintenance documentation for evidence of serviceability or malfunction
  • 1.3 Modification status is clearly established to assist in determining the overhaul requirements for the components
  • 1.4 Extent of overhaul or repair is correctly identified and documented
2. Dismantle and inspect audio and video system and reproducer components
  • 2.1 Component parts are dismantled in accordance with maintenance manuals while observing all relevant work health and safety (WHS) requirements
  • 2.2 Component parts are assessed for serviceability in accordance with the relevant maintenance documentation
  • 2.3 Parts requiring specialist repair are tagged and repair instructions are accurately specified
  • 2.4 Parts lists are compiled and processed in accordance with standard enterprise procedures
3. Repair and/or modify audio and video system and reproducer
  • 3.1 Component parts are repaired or replaced in accordance with the relevant maintenance documentation
  • 3.2 Modification of components or parts is undertaken, where required, by relevant manufacturers’ bulletins or procedures
4. Assemble, test and adjust audio and video system and reproducer components
  • 4.1 Assembly of component parts is carried out in accordance with specified tolerances and the applicable maintenance documents
  • 4.2 Assembled components are tested and adjusted in accordance with the applicable maintenance documentation using the appropriate test equipment
  • 4.3 Required maintenance documentation and modification records are completed and processed in accordance with standard enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D4458 MEA288A Repair or overhaul aircraft audio and visual systems and reproducers Unit of competency
Replaced By
State Code National Code Title Type
OEH72 MEAAVI0058 Repair and overhaul aircraft audio and visual systems and reproducers Unit of competency