Unit of competency Outline

Date retreived
22/07/2026 8:53 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Finish composite products

Finish composite products

Unit of competency
National Code
PMBPROD281
State Code
BAI98
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
30
Description
This unit of competency covers the skills and knowledge required to finish products made from composite materials.This unit of competency applies to operators who are required to check that tools, materials and components meet requirements; assemble and join components; prepare/finish surfaces; test the completed work against specifications; and recognise routine and non-routine problems and take appropriate action.This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Check work requirements
  • 1.1 Identify work requirements from production plan or request
  • 1.2 Check product, materials and equipment meet requirements for job
  • 1.3 Recognise requirements which may not be in accordance with usual practice
  • 1.4 Ask questions of appropriate person to confirm non-standard job specifications
  • 1.5 Ensure housekeeping is to requirements
  • 1.6 Identify hazards associated with the job and take appropriate action
2 Prepare equipment and materials
  • 2.1 Check tools, equipment, jigs, fixtures and measuring devices are to requirements
  • 2.2 Check that products, components and consumables are available
  • 2.3 Ensure safety equipment is available and fit for use
  • 2.4 Identify non-conformances and report as required
3 Assemble and finish products to specification
  • 3.1 Assemble and join components as required by specifications
  • 3.2 Prepare surfaces to procedures
  • 3.3 Make adjustments as required to meet specifications
  • 3.4 Check product is in specification and to required quality standard at every stage of the finishing operation
  • 3.5 Use relevant testing methods to ensure conformity with specifications
  • 3.6 Clean, adjust and lubricate equipment as required
  • 3.7 Perform emergency stops as required
4 Respond to routine problems in accordance with procedures
  • 4.1 Recognise known faults that occur during the operation
  • 4.2 Identify and take action on causes of routine faults
  • 4.3 Log problems as required
  • 4.4 Identify non-routine process and quality problems and take appropriate action
No information
No information
Replaces
State Code National Code Title Type
W7598 PMBPROD281B Finish composite products Unit of competency
Replaced By
State Code National Code Title Type
ODB35 PMBPROD281E Finish composite products Unit of competency