Unit of competency Outline

Date retreived
22/07/2026 11:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor textile production processes

Monitor textile production processes

Unit of competency
National Code
MSTTX3010
State Code
BAU15
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
04/07/2016
View on TGA
State Implementation and Classification
Approved Date
01/12/2016
Field of Education
030105 - Textile Making
Original Release Date
01/12/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to monitor textile production processes. The unit of competency applies to ensuring that textile production outcomes are consistent with job specifications, identifying performance parameters, solving problems and conducting checks of performance efficiency.The unit of competency involves working with discretion, judgement, and initiative on the job either individually or in a team environment, and may include liaison with specialist technicians, including textile mechanics or technicians and production supervisors.Enterprises covered by this unit will process natural or synthetic source fibres, yarns or textile materials. Production processes covered include, but are not limited to, carding, spinning, knitting, tufting, weaving, finishing, dyeing and non-woven production processes.Work may be conducted in small to large scale enterprises and may involve individual and team activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Determine job requirements
  • 1.1 Follow standard operating procedures (SOPs)
  • 1.2 Comply with work health and safety (WHS) requirements at all times
  • 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
  • 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Prepare to monitor textile production procedures
  • 2.1 Check job specifications for requirements including quantity, quality, colour and pattern
  • 2.2 Identify performance parameters to the extent required to be able to report known or suspected problems
  • 2.3 Monitor production processes to ensure consistency with specified outcomes and comply with workplace procedures
  • 2.4 Maintain job records and other documentation
3 Determine problem cause and solution
  • 3.1 Identify problems and categorise as either machine or process faults
  • 3.2 Refer to operating manuals and documentation and determine possible causes of the problems
  • 3.3 Gather further information to confirm and eliminate possible causes
  • 3.4 Consult appropriate personnel to confirm causes
  • 3.5 Determine and trial immediate or short-term solution and/or determine permanent solution to eliminate the cause of the problem in consultation with appropriate personnel
4 Conduct regular checks of performance
  • 4.1 Make regular checks of process operation and assess results against job specifications
  • 4.2 Record results of checks and identify opportunities for process improvements
  • 4.3 Communicate and document improvements
No information
No information
Replaces
State Code National Code Title Type
W7523 LMTTX3010B Monitor textile production processes Unit of competency