Unit of competency Outline

Date retreived
22/07/2026 7:10 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake basic process planning

Undertake basic process planning

Unit of competency
National Code
MEM30018A
State Code
W5434
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
01/12/2005
View on TGA
State Implementation and Classification
Approved Date
19/08/2014
Field of Education
030101 - Manufacturing Engineering
Original Release Date
19/08/2014
Nominal Hours
40
Description
This unit covers undertaking a basic determination of process specifications and production sequence for a manufacturing operation.
Notes
Elements and Performance Criteria
1. Assist in determination of a process sequence
  • 1.1. A basic analysis of process specifications using relevant job instructions, drawings, cost objectives, and operational procedures is undertaken.
  • 1.2. An operation or process sheet is prepared based on analysis.
  • 1.3. The process steps are clearly documented and approved in accordance with standard operating procedures.
  • 1.4. Flow charts, based on analysis, are produced where required.
  • 1.5. Material and parts lists are prepared, based on analysis, for the production process in accordance with standard operating procedures.
  • 1.6. Tooling and/or equipment requirements are determined in conjunction with supervisor and other expert personnel.
  • 1.7. All requirements are documented in accordance with standard operating procedures.
2. Prepare and submit new/revised operation sheet/flow chart/parts list as required
  • 2.1. New/revised operation sheet/flow chart/parts list is prepared in accordance with standard operating procedures.
  • 2.2. New/revised operation requirements are submitted in accordance with enterprise approval procedures.
3. Issue or file approved operation sheet/flowchart/parts list as required
  • 3.1. Approved drawings and or parts lists are stored and catalogued or issued in accordance with standard operating procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Operation or process sheet
Includes operation sheets, sketches, tooling, equipment schedules and gauges etc.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to undertake basic process planning.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with undertaking basic process planning, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
State Code National Code Title Type
OEV99 MEM30018 Undertake basic process planning Unit of competency