Unit of competency Outline

Date retreived
22/07/2026 4:00 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use firearms for pest control activities from aircraft

Use firearms for pest control activities from aircraft

Unit of competency
National Code
AHCPMG311
State Code
BAQ25
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
19/12/2018
View on TGA
State Implementation and Classification
Approved Date
12/01/2017
Field of Education
059901 - Pest And Weed Control
Original Release Date
12/01/2017
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to conduct pest control activities from the air using firearms. The unit applies to individuals who hold a valid firearms license and work under broad direction and take responsibility for their own work. They use discretion and judgement in the selection and use of available resources.State or territory licensing, legislative or certification requirements apply in some jurisdictions.
Notes
Elements and Performance Criteria
1. Undertake pre-flight procedures
  • 1.1 Confirm location and boundaries for the activities with pilot
  • 1.2 Obtain appropriate approvals and permits to conduct pest control activity according to regulations and the Civil Aviation Safety Authority (CASA)
  • 1.3 Check time and duration of flight and notify relevant personnel
  • 1.4 Confirm flight plans and search and rescue operations with the pilot and ground crew
  • 1.5 Check on-board emergency equipment with pilot
  • 1.6 Check emergency landing procedures with pilot
  • 1.7 Check landing-site requirements
  • 1.8 Confirm intent to approach or leave the aircraft with pilot
  • 1.9 Approach aircraft according to aircraft and workplace health and safety procedures
2. Prepare activity related to the use of a firearm
  • 2.1 Carry current firearm's license according to regulations
  • 2.2 Ensure the prescribed firearm is functioning correctly and sighted according to operation procedures
  • 2.3 Check the firearm to ensure it meets appropriate regulatory standards
3. Use firearm from aircraft
  • 3.1 Stow equipment safely on aircraft according to health and safety in the workplace procedures and legislative and regulatory requirements
  • 3.2 Wear harnesses and helmet during pest control activities according to health and safety in the workplace procedures
  • 3.3 Plot route and location of activities on map
  • 3.4 Carry out pest control activity safely according to legislative and regulatory requirements, workplace procedures and instructions
  • 3.5 Ensure animal is humanely destroyed
  • 3.6 Observe and record pest numbers according to workplace procedures
4. Complete work relating to the use of firearms for pest control
  • 4.1 Clean and store equipment and materials according to workplace procedures
  • 4.2 Dispose of waste and debris according to workplace procedures
  • 4.3 Document and report activities according to workplace instructions
No information
No information
Replaces
State Code National Code Title Type
D7269 AHCVPT304A Conduct vertebrate pest activities from aircraft Unit of competency