Unit of competency Outline
Date retreived
22/07/2026 12:12 PM AWST
22/07/2026 12:12 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform machine setting and operational maintenance
Perform machine setting and operational maintenance
Unit of competency
National Code
LMTEW2014A
LMTEW2014A
State Code
W7209
W7209
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
15/10/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
15/10/2014
Nominal Hours
80
Description
This unit covers the skills and knowledge required to set machines for product changes, reset them after general fibre related stoppages and perform minor maintenance of machinery.
Notes
Elements and Performance Criteria
1 Determine required specifications
- 1.1 Required specifications for raw materials, product and machine are identified and interpreted for application in the testing and setting up process
2 Set machine
- 2.1 Machine is cleaned and set in accordance with raw material and product specifications and machine manufacturer and workplace procedures
- 2.2 During setting and testing, condition of work area around machine is maintained to meet workplace and OHS practices
3 Conduct sample or trial runs and readjust
- 3.1 Machine operation is checked to ensure correct operation
- 3.2 Where appropriate, a sample is produced and checked for conformance with workplace requirements and product standards and further adjustment is made until sample meets specifications
4 Investigate, identify and rectify machine operating problems
- 4.1 Appropriate diagnostic procedures and tests are used to locate and identify faults in the machine
- 4.2 Correct hand tools and measuring equipment are chosen and use to rectify problems
- 4.3 Major problems in machine are identified and reported
- 4.4 Minor problems, which are within the operator's skill level, are identified and adjustments or repairs are assessed
- 4.5 Environmental requirements and procedures concerned with waste, pollution and recycling of materials are correctly applied at all stages of the process
5 Rectify minor machine faults
- 5.1 Adjustments or corrections are assessed consistent with operator's skill level
- 5.2 Machine is checked to ensure correct operation
- 5.3 Correct hand tools and measurement equipment are chosen and used to correct problem
6 Communicate information
- 6.1 Records and other documentation of setting and maintenance work are clearly and accurately completed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Machine may include
A range of machines and equipment which may be microprocessor or computer controlled, including the following:
blending and carding
combing
gilling
finishing
bale pressing
scouring
superwash
backwash
carbonising
Materials, hand tools and equipment may include
cleaning equipment
detergents and other chemicals
hand and power tools normally applicable to the tasks
hand trolleys
pallet trucks
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Machine may include
A range of machines and equipment which may be microprocessor or computer controlled, including the following:
blending and carding
combing
gilling
finishing
bale pressing
scouring
superwash
backwash
carbonising
Materials, hand tools and equipment may include
cleaning equipment
detergents and other chemicals
hand and power tools normally applicable to the tasks
hand trolleys
pallet trucks
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects of evidence to be considered
Demonstrates skills and knowledge to:
comply with all relevant safety requirements; including isolation or shutdown of machines, use of safety and lockout devices, and attachment of appropriate warning tags
interpret work orders
interpret raw materials, product, and machine specifications needed for machine setting and maintenance
perform normal testing, setting, and maintenance of machines
investigate improper operation of machines and identify and rectify operating problems
conduct sample runs of machines and check products against required standards
perform operator maintenance of work area
document and communicate work related information including reporting of non-conforming outcomes and other problems
Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.
Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects of evidence to be considered
Demonstrates skills and knowledge to:
comply with all relevant safety requirements; including isolation or shutdown of machines, use of safety and lockout devices, and attachment of appropriate warning tags
interpret work orders
interpret raw materials, product, and machine specifications needed for machine setting and maintenance
perform normal testing, setting, and maintenance of machines
investigate improper operation of machines and identify and rectify operating problems
conduct sample runs of machines and check products against required standards
perform operator maintenance of work area
document and communicate work related information including reporting of non-conforming outcomes and other problems
Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.
Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.
Interdependent assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXP07 | LMTEMEW02A | Perform machine setting and operational maintenance | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OBA04 | MSTTX2011 | Perform wool processing machine setting | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W368 | LMT30107 | Certificate III in Textile Production | Qualification |
| W354 | LMT20207 | Certificate II in Textile Production (Complex or Multiple Processes) | Qualification |