Unit of competency Outline

Date retreived
22/07/2026 12:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply protective paint coating systems

Apply protective paint coating systems

Unit of competency
National Code
CPCCPD3030
State Code
OCM90
TGA Status
Current
DTWD Status
Approved
Current Release Number
4.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040325 - Painting, Decorating And Sign Writing
Original Release Date
01/06/2021
Nominal Hours
24
Description
This unit of competency specifies the skills and knowledge required to apply specialised paint coating systems as a protective measure against atmospheric conditions, sanitation and hygiene risks and the impacts of high traffic areas. The unit includes preparation of the work area and materials, application of the coating system and clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Review work instructions to apply protective paint coating systems and select method of application consistent with the job location, type of paint, type and condition of surface and climatic conditions.
  • 1.2 Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select and fit personal protective equipment (PPE) as required for each task.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Identify materials appropriate to the work application, calculate quantities and prepare, handle safely and locate ready for use.
  • 1.6 Select tools and equipment, check for serviceability and rectify and report any faults.
2 Prepare work site and surfaces.
  • 2.1 Protect surrounding surfaces with drop sheets, masking or removal of objects.
  • 2.2 Ensure ventilation is adequate and implement precautions to prevent fire and explosion.
  • 2.3 Implement measures to ensure application area remains free of dust and foreign matter.
  • 2.4 Determine suitability of surface for protective paint coating and select surface preparation method to meet substrate requirements.
  • 2.5 Prepare surface, repair, stop and fill imperfections, and sand to a smooth finish ready for the protective coating.
  • 2.6 Prepare and mix protective coatings to manufacturers’ specifications.
3 Apply protective coating.
  • 3.1 Apply and finish protective coating system to requirements.
  • 3.2 Perform wet film thickness measurement on wet surface for quality assurance and rectify any issues.
  • 3.3 Perform dry film thickness measurement on dry surface for quality assurance and rectify any issues.
4 Clean-up.
  • 4.1 Clean-up in accordance with all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.
  • 4.2 Identify hazardous material for separate handling by authorised personnel.
  • 4.3 Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.
  • 4.4 Check and maintain tools and equipment and clean with appropriate solvents.
  • 4.5 Dispose of paint waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.
  • 4.6 Store tools and equipment, and seal and segregate unused materials to avoid spontaneous ignition.
No information
No information
Replaces
State Code National Code Title Type
WE990 CPCCPD3030B Apply protective paint coating systems Unit of competency
State Code National Code Title Type
BGE5 CPC30620 Certificate III in Painting and Decorating Qualification
BGD4 CPC30820 Certificate III in Roof Tiling Qualification