Unit of competency Outline

Date retreived
24/07/2026 6:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect, clean and handle optical fibre cable and connectors

Inspect, clean and handle optical fibre cable and connectors

Unit of competency
National Code
ICTTEN318
State Code
OBA37
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/08/2019
View on TGA
State Implementation and Classification
Approved Date
27/11/2019
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
27/11/2019
Nominal Hours
20
Description
This unit describes the skills and knowledge required to inspect and clean optical fibre connectors and to follow handling and placement practices for optical fibre patch leads and cables. It relates to practices necessary in the installation and patching of fibre for new or replacement cables in switching, transmission and fixed and mobile radio networks.It applies to lines workers, technicians or jointers working for carriers and/or service providers. It also applies to work performed under direction of the relevant authority.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for fibre patching
  • 1.1 Obtain design schematics and cut over sequence for fibre patching
  • 1.2 Discuss and record details of activities and work schedule with relevant authority
  • 1.3 Ensure all tools and materials required for patching are available and in good condition
  • 1.4 Undertake an impact risk assessment, including customer impact risk according to work health and safety (WHS) guidelines for fibre patching requirements, and prepare any necessary notifications
2. Prepare each connector and bulkhead for patching
  • 2.1 Work safely and identify appropriate connector and lead type
  • 2.2 Place fibre patch leads in support pathways avoiding pressure points, crushing and excess bending
  • 2.3 Ensure connectors match bulkhead connectors
  • 2.4 Remove connector dust cover and inspect connecting surface for dust or damage using the correct video adaptor optical microscope
  • 2.5 Clean connector, as required, with recommended cleaning materials and re-inspect
  • 2.6 Insert connector and label in accordance with customer practices
  • 2.7 Secure cables according to manufacturer instructions and customer practices
  • 2.8 Escalate hardware replacement problems with the relevant authority
  • 2.9 Test replacement hardware to ensure satisfactory functionality
3. Clean-up worksite and complete administrative work
  • 3.1 Remove waste and debris from worksite and dispose of according to environmental requirements
  • 3.2 Recover faulty equipment and return to appropriate point for disposal or refurbishment
  • 3.3 Complete documentation, update fault records and make recommendations according to customer practices
  • 3.4 Notify appropriate person at the relevant authority of job completion and obtain sign-off
No information
No information
Replaces
State Code National Code Title Type
AWK43 ICTTEN311 Inspect, clean and handle optical fibre cable and connectors Unit of competency