Unit of competency Outline
Date retreived
22/07/2026 5:52 AM AWST
22/07/2026 5:52 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Breed trees
Breed trees
Unit of competency
National Code
FPIFGM5215A
FPIFGM5215A
State Code
D3825
D3825
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
01/06/2011
Field of Education
050301 - Horticulture
Original Release Date
01/06/2011
Nominal Hours
90
Description
This unit describes the outcomes required to improve yield through improved tree breeding. It includes conducting consultative processes and monitoring and analysis of the effectiveness of the breeding General workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publicationThis unit replaces FPIFGM5207A Breed trees
Notes
Elements and Performance Criteria
1. Plan tree breeding
- 1.1. Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to tree breeding are identified and followed
- 1.2. Site environmental protection measures are identified and adhered to in line with relevant legislation and regulations
- 1.3. Timeline and budget are identified and checked with appropriate personnel
- 1.4. Organisational strategic and marketing plans are reviewed and analysed to identify impact on tree breeding operation
- 1.5. Consultative processes are used to obtain input to the plan in line with operational requirements
- 1.6. Desirable breeding characteristics are identified for the breeding plan
- 1.7. Appropriate reproduction techniques are selected to optimise propagation of the trees
- 1.8. Breeding plan is developed, documented and communicated in line with organisational requirements
- 1.9. Necessary approvals are sought and obtained in line with organisational requirements
2. Implement breeding operation
- 2.1. Breeding operation is implemented in line with schedule, budget and legislative requirements
- 2.2. Required resources and authorisations are obtained in line with organisational and legislative requirements
- 2.3. Schedule for site is organised in conjunction with technical operators in line with organisational requirements
- 2.4. Communication with others is established and maintained in line with OHS and organisational requirements
- 2.5. Documentation requirements are identified and recorded in line with OHS requirements
3. Monitor tree breeding
- 3.1. Monitoring points are identified and adhered to in line with organisational procedures
- 3.2. Breeding operation is checked to ensure environmental, OHS, organisational and legislative compliance requirements are met, and documentation is completed and submitted as required
- 3.3. Communication with operations supervisor is maintained in line with OHS and organisational requirements
- 3.4. Breeding plan and processes are amended as required to ensure specifications, quality and performance targets are met
4. Review tree breeding
- 4.1. Tree breeding operation is reviewed against breeding plan and organisational requirements
- 4.2. Information and data is analysed to determine effectiveness of breeding operation and improvements to future plans
- 4.3. Recommendations for future operations are prepared based on findings of analysis and consultation
- 4.4. Tree breeding operation is recorded and reported to the appropriate personnel
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices including required actions relating to forest fire
manual handling including shifting, lifting and carrying
heritage and traditional land owner issues
Legislative requirements:
are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
heritage and traditional land owner issues
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use and maintenance and storage requirements
environmental management requirements (waste disposal, recycling and re-use guidelines)
Tree breeding
may be to improve the yield and form of trees through improved breeding
Environmental protection measures may relate to:
hygiene of the area
relevant national, State and local legislation and regulations
ground growth
canopy
general forest lean
wind speed and direction
fallen trees
density of trees
ground slope
soil and water protection
ground hazards and obstacles
and may include:
contingencies for modifying operations during wet or other adverse weather conditions
Timeline may be critical to:
the productivity of the forest
success of the operation
suitability for various forest products (e.g. pruning certification)
Appropriate personnel may include:
operations supervisor
management
colleagues
client
relevant groups
Consultative processes may include:
face-to-face meetings
telephone
facsimile
written and email communication
and may be with:
clients
technical operators
marketing groups
operations supervisor
colleagues
relevant groups/bodies such as environmental bodies
local, State and federal government bodies and agencies
internal policy groups
labour force
Operational requirements may include:
end product requirements
stand treatment certification documentation
contractual requirements and obligations
environmental and public relations imperatives
current state of the forest resource
Breeding characteristics may include:
growth rate
tree form
branch angle
fibre length
fibre orientation
extractive content
salt tolerance
drought tolerance
density
Reproduction techniques may include:
self and cross pollination
cuttings
grafting
layering
stolons
suckers
Approvals may be required by:
environmental bodies
local, State and federal government bodies and agencies
and may refer to:
long-term budget approvals
Resources may include:
people
materials
equipment
Authorisations may include:
permits
approvals
licences relating to neighbouring properties
and may refer to:
hours of operation
use and application of chemicals
the environment
Communication may include:
regular communication with the operations supervisor to ensure smooth operation and progress
Documentation requirements
must be clear and accurate and may include:
changes to the plan or process
supplementary approvals
supplementary notifications
Monitoring points
should be performed at key stages of the process
Compliance requirements may include:
OHS
organisational, legislative and environmental regulations, procedures, practices and precautions
and adherence to:
site environmental imperatives
specifications
quality
performance targets
Information
may be from numerous sources and include:
legislation
forest biology
tree physiology
new technology
Records and reports may refer to:
difficulties or issues faced during planning and implementation of tree breeding operation
recommendations for future work
results
costs
data analysis
and may be:
manual
using a computer-based system
other appropriate organisational communication system
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices including required actions relating to forest fire
manual handling including shifting, lifting and carrying
heritage and traditional land owner issues
Legislative requirements:
are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
heritage and traditional land owner issues
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use and maintenance and storage requirements
environmental management requirements (waste disposal, recycling and re-use guidelines)
Tree breeding
may be to improve the yield and form of trees through improved breeding
Environmental protection measures may relate to:
hygiene of the area
relevant national, State and local legislation and regulations
ground growth
canopy
general forest lean
wind speed and direction
fallen trees
density of trees
ground slope
soil and water protection
ground hazards and obstacles
and may include:
contingencies for modifying operations during wet or other adverse weather conditions
Timeline may be critical to:
the productivity of the forest
success of the operation
suitability for various forest products (e.g. pruning certification)
Appropriate personnel may include:
operations supervisor
management
colleagues
client
relevant groups
Consultative processes may include:
face-to-face meetings
telephone
facsimile
written and email communication
and may be with:
clients
technical operators
marketing groups
operations supervisor
colleagues
relevant groups/bodies such as environmental bodies
local, State and federal government bodies and agencies
internal policy groups
labour force
Operational requirements may include:
end product requirements
stand treatment certification documentation
contractual requirements and obligations
environmental and public relations imperatives
current state of the forest resource
Breeding characteristics may include:
growth rate
tree form
branch angle
fibre length
fibre orientation
extractive content
salt tolerance
drought tolerance
density
Reproduction techniques may include:
self and cross pollination
cuttings
grafting
layering
stolons
suckers
Approvals may be required by:
environmental bodies
local, State and federal government bodies and agencies
and may refer to:
long-term budget approvals
Resources may include:
people
materials
equipment
Authorisations may include:
permits
approvals
licences relating to neighbouring properties
and may refer to:
hours of operation
use and application of chemicals
the environment
Communication may include:
regular communication with the operations supervisor to ensure smooth operation and progress
Documentation requirements
must be clear and accurate and may include:
changes to the plan or process
supplementary approvals
supplementary notifications
Monitoring points
should be performed at key stages of the process
Compliance requirements may include:
OHS
organisational, legislative and environmental regulations, procedures, practices and precautions
and adherence to:
site environmental imperatives
specifications
quality
performance targets
Information
may be from numerous sources and include:
legislation
forest biology
tree physiology
new technology
Records and reports may refer to:
difficulties or issues faced during planning and implementation of tree breeding operation
recommendations for future work
results
costs
data analysis
and may be:
manual
using a computer-based system
other appropriate organisational communication system
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can breed trees
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements of this unit and include demonstration of:
following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to breeding trees
following organisational policies and procedures relevant to breeding trees
planning a tree breeding operation using consultative processes with colleagues and stakeholders to obtain inputs and ensure efficient and safe processes and timelines
safely implementing a tree breeding operation in line with documented plan and budget, and making adjustments to plan or operation
reviewing and analysing breeding operation and using findings to document improvements to future operations
preparing and presenting a detailed report including costs, processes and analysing findings of the breeding operation
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to comply with relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment methods applicable to this unit may include direct observation of tasks with questioning of required knowledge and the completion of projects, assignments or written tests
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can breed trees
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements of this unit and include demonstration of:
following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to breeding trees
following organisational policies and procedures relevant to breeding trees
planning a tree breeding operation using consultative processes with colleagues and stakeholders to obtain inputs and ensure efficient and safe processes and timelines
safely implementing a tree breeding operation in line with documented plan and budget, and making adjustments to plan or operation
reviewing and analysing breeding operation and using findings to document improvements to future operations
preparing and presenting a detailed report including costs, processes and analysing findings of the breeding operation
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to comply with relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment methods applicable to this unit may include direct observation of tasks with questioning of required knowledge and the completion of projects, assignments or written tests
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S4689 | FPIFGM5207A | Breed trees | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXK45 | FWPFGM5215 | Breed Trees | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J478 | FPI50111 | Diploma of Forest and Forest Products | Qualification |