Unit of competency Outline

Date retreived
22/07/2026 5:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Prepare cutting list from plans and job specifications

Prepare cutting list from plans and job specifications

Unit of competency
National Code
MSFFM3010
State Code
WI431
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030113 - Cabinet Making
Original Release Date
19/06/2014
Nominal Hours
16
Description
This unit of competency covers reading plans and job specifications to prepare cutting lists and providing data for subsequent processing operations.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Read plans and job specifications
  • 1.1 Job specifications, set-out rods and plans are used to determine the job requirements, including cutting list, dimension, design, quality materials and processes
  • 1.2 Job components are established according to job specification and workplace procedures
  • 1.3 Geometry of components are established according to specifications
2 Prepare cutting lists
  • 2.1 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 2.2 Cutting list is checked and set out in accordance with workplace procedures, plans and specifications
  • 2.3 Components are identified and described using common workplace terminology
  • 2.4 Sizes and tolerance of components are established and documented in accordance with workplace procedures
  • 2.5 Processing requirements are identified and documented
  • 2.6 Dimensional allowances for further processing are identified and documented
3 Read and interpret cutting lists
  • 3.1 Cutting list is read and interpreted in accordance with the job requirements
  • 3.2 Quantities and dimensions are interpreted
  • 3.3 Quality standards and waste factors are considered
  • 3.4 Processing methods are established
  • 3.5 Processing time is identified
No information
No information
Replaces
State Code National Code Title Type
W8619 LMFFM3012B Prepare cutting list from plans and job specifications Unit of competency
Replaced By
State Code National Code Title Type
OEJ82 MSFFM3031 Prepare cutting lists from design and production documentation Unit of competency