Unit of competency Outline

Date retreived
22/07/2026 8:57 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply bridge durability treatment

Apply bridge durability treatment

Unit of competency
National Code
RIICTB202D
State Code
WH163
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
55
Description
This unit describes a participant’s skills and knowledge required to apply bridge durability treatment in Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to apply bridge durability treatment
  • 1.1. Access, interpret and apply bridge durability treatment documentation and ensure the work activity is compliant
  • 1.2. Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3. Confirm and apply environmental protection and safety requirements
  • 1.4. Obtain, interpret and implement traffic management signage requirements
  • 1.5. Select and check for faults plant, tools and equipment to carry out tasks
  • 1.6. Identify, confirm, safely handle and locate ready for use materials required for the work application
  • 1.7. Select and wear correct personal protective equipment appropriate for work activities
  • 1.8. Identify, address and report hazards, risks and environmental issues
  • 1.9. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Apply protective coatings and preservatives
  • 2.1. Locate access devices in reach of areas to be coated
  • 2.2. Select resources in accordance with the task
  • 2.3. Select and apply surface preparation technique
  • 2.4. Apply protective coating/preservatives to the prepared area
3. Install flashing/capping
  • 3.1. Locate access devices in reach of areas to be flashed/capped
  • 3.2. Select resources, materials and equipment in accordance with the task
  • 3.3. Prepare flashing/capping materials for installation
  • 3.4. Apply protective coating to the surfaces to be flashed/capped
  • 3.5. Fix flashing/capping to all specified timber members
4. Clean up
  • 4.1. Clear work area and dispose of or recycle materials
  • 4.2. Clean, check, maintain and store plant, tools and equipment
No information
No information
Replaced By
State Code National Code Title Type
OCX39 RIICTB202E Apply bridge durability treatments Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification