Unit of competency Outline
Date retreived
22/07/2026 10:31 PM AWST
22/07/2026 10:31 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Transfer personnel and loads
Transfer personnel and loads
Unit of competency
National Code
CPPSIS3008A
CPPSIS3008A
State Code
D1493
D1493
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
31/10/2008
Field of Education
031101 - Surveying
Original Release Date
31/10/2008
Nominal Hours
40
Description
This unit of competency specifies the outcomes required to use light vehicles, including boats, to transfer personnel and loads. It requires the ability to operate four-wheel drive vehicles in off-road conditions, and to load according to plans to ensure efficiency and safety of operations. Functions would be carried out under supervision, often in a team environment, and within organisational guidelines.
Notes
Elements and Performance Criteria
1Prepare for loading.
- 1.1 Loading needs for spatial and/or surveying site work are identified and located according to instructions from appropriate personnel.1.2 Loading and unloading plans are followed to ensure efficient and safe operations.1.3 Characteristics of the load are taken into account to ensure that the distribution is even, legal and within safe working capacity.1.4 Skills and knowledge are updated to accommodate changes in equipment and operations.
2Manage load.
- 2.1 Goods are loaded according to relevant mass and loading regulations and workplace procedures.2.2 Lifting aids and appliances are selected and used to assist loading procedures, according to workplace procedures and applicable regulations and legislation.2.3 Load is secured using the correct load restraint and protection equipment.2.4 Load is protected according to legal and workplace OHS requirements.2.5 Loading and unloading activities are conducted in a safe and efficient manner taking into account suitable locations, stowage, safe use of equipment and balance of the remaining load.2.6 Goods requiring special handling or documentation are identified and appropriate procedures are followed.2.7 Personal protective equipment is used according to organisational guidelines.
3Maintain awareness of driving conditions.
- 3.1 Traffic flowand work area conditions are constantly monitored and anticipated to allow for safe, injury-free and damage-free operations.3.2 Most efficient and safe route of travel is selected by monitoring and anticipating traffic flow, weather conditions, road standards and any other factors likely to cause delays, route deviations, injury to people or damage to equipment, loads and facilities.3.3 Any occurrence in the work area that may affect the safety and efficiency of operations is reported to the appropriate personnel.
4Manage vehicle efficiency.
- 4.1 Vehicle performance is maintained through pre-operational inspections and checks.4.2 Performance and efficiency of vehicle operation are monitored during use.
- 4.3 Defective or irregular performance or malfunctions are reported to the appropriate authority.4.4 Vehicle records are maintained and updated, and information is processed according to workplace procedures.
No information
No information
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| WE765 | CPPSIS3018A | Transfer personnel and loads | Unit of competency |