Unit of competency Outline

Information current as of
21/10/2026 11:43 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Undertake preliminary fault finding and machine reset

Undertake preliminary fault finding and machine reset

Unit of competency
National Code
AUMFTM001
State Code
WH944
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
35
Field of Education
080317 - Quality Management
Description
This unit describes the performance outcomes required to enable an operator to perform a simple fault-finding task in a production environment.It applies to those in a manufacturing environment and involves the application of skills and knowledge at a specialist level. No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Prepare for fault finding and machine reset
  • 1.1 Work instructions are identified and confirmed
  • 1.2 Fault-finding checklist is developed and implemented
  • 1.3 Machines and equipment for preliminary fault finding and reset are identified
2. Undertake fault finding and machine reset
  • 2.1 Machine faults and machine reset requirements are identified according to checklist
  • 2.2 Identified faults are repaired, adjusted and recorded
  • 2.3 Machines are reset as required according to workplace procedures
  • 2.4 Machinery repair team and other relevant personnel are advised of outcomes
3. Complete work processes
  • 3.1 Causes of faults are reported to appropriate personnel
  • 3.2 Suggestions for improvement to machine operating procedures are reported
  • 3.3 New process is validated and workplace is restored
  • 3.4 Work sheets are completed according to workplace procedures
No information
No information
No information