Unit of competency Outline

Date retreived
22/07/2026 7:06 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct hose and pipe assemblies for competition vehicles

Construct hose and pipe assemblies for competition vehicles

Unit of competency
National Code
AURM340607B
State Code
D7603
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
030503 - Vehicle Mechanics
Original Release Date
12/10/2011
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required construct hose and pipe assemblies for competition vehicles.It requires the ability to prepare for and use analytical and organisational knowledge, judgement and problem-solving skills in the construction of hose/pipe assemblies for competition vehicles.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Use team instructions, supplementary regulations and component supplier specifications to determine job requirements, including design, quality, materials, equipment and quantities
  • 1.2. Observe occupational health and safety (OHS) requirements, including regulatory requirements, equipment and system isolation requirements, and personal protection needs, throughout the work
  • 1.3. Check specifications and seek clarification, where required
  • 1.4. Organise hose/pipe type and fittings according to application
  • 1.5. Organise tooling and equipment and check for safe and effective operation
  • 1.6. Clean and lay out work area for job requirements
  • 1.7. Report problems with the work area or the operation of equipment to appropriate persons
  • 1.8. Identify procedures for minimising waste material
2. Construct hose/pipe assemblies
  • 2.1. Measure and calculate hose/pipe length
  • 2.2. Cut hose/pipe length
  • 2.3. Bend hose/pipe to conform to fitting requirement
  • 2.4. Install and secure fittings in accordance with component supplier specifications and procedures or team requirements
  • 2.5. Clean and pressure-test assembly
3. Clean up work area and complete record keeping
  • 3.1. Return tooling to storage
  • 3.2. Tag and shelve/store surplus components and consumables
  • 3.3. Remove surplus material from work area
  • 3.4. Clean up spillage from work area and vehicle
  • 3.5. Complete team/component supplier documentation
No information
No information
Replaces
State Code National Code Title Type
W2892 AURM340607A Construct hose/pipe assemblies for competition vehicles Unit of competency
Replaced By
State Code National Code Title Type
WF291 AURMTS3001 Construct hose and pipe assemblies for competition vehicles Unit of competency
State Code National Code Title Type
D543 AUR30911 Certificate III in Motorsport Qualification