Unit of competency Outline

Date retreived
22/07/2026 10:02 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce compounded materials

Produce compounded materials

Unit of competency
National Code
PMBPROD352
State Code
BAI42
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
22/06/2016
View on TGA
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
030305 - Materials Engineering
Original Release Date
05/08/2016
Nominal Hours
40
Description
This unit of competency covers the skills and knowledge required to operate and adjust compounding processes to produce product. Compounding is typically used to combine resins with colourants, stabilizers, flame retardants or other additives.This unit of competency applies to experienced operators who are required to start up and shut down compounding equipment, monitor equipment operation, establish a stable process, make adjustments to remedy faults and non-conformity and solve problems within area of responsibility.This unit of competency applies to an experienced operator demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The experienced operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan own work requirements
  • 1.1 Identify most appropriate equipment to be used for production and upstream and downstream operations from production plan or request
  • 1.2 Identify and check materials required, including additives
  • 1.3 Implement measures to control identified hazards in line with procedures and duty of care
  • 1.4 Identify requirements for materials, quality, production and equipment checks
2 Start up compounding equipment to procedures
  • 2.1 Determine machine/equipment requirements
  • 2.2 Set process to required settings
  • 2.3 Check materials are correct
  • 2.4 Take appropriate action for non-conforming materials
  • 2.5 Set up date, batch and materials markings to specifications, as required
  • 2.6 Complete pre-start checks
  • 2.7 Start up compounder
3 Operate and make adjustments to the compounding process to procedures
  • 3.1 Operate compounding process, noting key variables
  • 3.2 Monitor controls/displays/terminals for production/process data
  • 3.3 Take samples as required and identify product out of specification
  • 3.4 Monitor product quality
  • 3.5 Make adjustments to remedy faults and nonconformity to standard as required
  • 3.6 Establish a stable compounding process
  • 3.7 Adjust process to minimise scrap
  • 3.8 Clean, adjust and lubricate machine/equipment as required
4 Shut down machine to procedures
  • 4.1 Determine type of shutdown
  • 4.2 Select appropriate purging method
  • 4.3 Purge efficiently and adequately as required
  • 4.4 Leave machine in appropriate condition and with appropriate locks, tags or notices
  • 4.5 Complete relevant documentation
  • 4.6 Ensure area is clean and clear after the shutdown, in readiness for the next start-up
5 Anticipate and solve problems
  • 5.1 Recognise a problem or a potential problem
  • 5.2 Determine problems needing priority action
  • 5.3 Refer problems outside area of responsibility to appropriate person, with possible causes
  • 5.4 Seek information and assistance as required to solve problems
  • 5.5 Solve problems within area of responsibility
  • 5.6 Follow through items initiated until final resolution has occurred
No information
No information
Replaces
State Code National Code Title Type
W7652 PMBPROD352A Produce compounded materials Unit of competency
Replaced By
State Code National Code Title Type
ODB63 PMBPROD352E Produce compounded materials Unit of competency
State Code National Code Title Type
BCT3 PMB30116 Certificate III in Polymer Processing Qualification
BCU0 PMB40116 Certificate IV in Polymer Technology Qualification