Unit of competency Outline

Date retreived
22/07/2026 6:17 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and maintain industrial pipe work

Install and maintain industrial pipe work

Unit of competency
National Code
UEPMNT302
State Code
OAI30
TGA Status
Current
DTWD Status
Pending
Current Release Number
2.00
Current Release Date
20/04/2022
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030717 - Plant And Machine Operations
Original Release Date
Nominal Hours
Description
This unit involves the skills and knowledge required to undertake work associated with the installation, maintenance and fabrication of industrial pipe work, which may also involve fault finding and repairs.Industrial piping is used to convey fluids, liquids and gases from one location to another. Pipe fabrication is the process of making and assembling industrial pipe work to suit each power generation facility's requirements. Competency in this unit requires the ability to plan work, fabricate and install industrial pipe work, maintain industrial pipe work and to report on all completed work tasks. Individuals will, in general, work under supervision in an electrical, electronic and/or mechanical equipment repair workshop or no site Power generation maintenance personnel are typically trained and authorised to receive permits to work. No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare for work
  • 1.1 Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
  • 1.2 Occupational Health and Safety (OHS)/Work, Health and Safety (WHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
  • 1.3 Resources are obtained and inspected for compliance with job specification
  • 1.4 Relevant plans, drawings and manuals are selected and used, in accordance with the work procedures
  • 1.5 Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification
  • 1.6 Work is planned, sequenced and prioritised, in accordance with workplace
  • 1.7 Potential hazards are identified, and risk control measures, are selected and implemented, in accordance with workplace procedures
  • 1.8 Work area is prepared, in accordance with workplace procedures
2 Fabricate and install pipe work
  • 2.1 Isolations are confirmed, where appropriate, in accordance with workplace procedures
  • 2.2 Pipe runs are identified, calculations performed and sketches made of planned installation in accordance with workplace procedures
  • 2.3 Pipe work is fabricated, using appropriate techniques and equipment, in accordance with workplace procedures
  • 2.4 Pipe work is levelled and aligned, and installed or coupled, in accordance with the workplace procedures
3 Maintain industrial pipework
  • 3.1 Pipe work found to be faulty is repaired and replaced to conform to site requirements or manufacturers' specifications, in accordance with workplace procedures
  • 3.2 Pipe work modifications and alterations are undertaken, in accordance with workplace procedures, site requirements and manufacturers' specifications
  • 3.3 Machinery and/or plant is returned to service, and pipe work is monitored and adjusted, in accordance with workplace procedures
4 Complete work
  • 4.1 Work is completed, and appropriate personnel notified, in accordance with workplace procedures
  • 4.2 Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
  • 4.3 Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
  • 4.4 Work completion details are finalised, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE227 UEPMNT302B Install and maintain industrial pipework Unit of competency