Unit of competency Outline

Date retreived
22/07/2026 6:08 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Supervise technical operations for gas distribution or transmission

Supervise technical operations for gas distribution or transmission

Unit of competency
National Code
UEGNSG110B
State Code
S8139
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
19/01/2012
State Implementation and Classification
Approved Date
07/04/2014
Field of Education
080315 - Project Management
Original Release Date
07/04/2014
Nominal Hours
54
Description
1) Scope:1.1) DescriptorThis Unit covers the skills and knowledge required to supervise technical operations for gas distribution and transmission. The competency standard refers to Resources; Operational; Monitoring; Relevant Personnel; Types of Faults; Reports.
Notes
Elements and Performance Criteria
1 Plan and prepare to supervise operations
  • 1.1 Project activities are planned to prevent damage and to ensure minimal disruption to gas supply
  • 1.2 Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes to a quality standard and in accordance with established procedures
  • 1.3 Risk control measures are identified, prioritised and evaluated against the work schedule
  • 1.4 Relevant requirements and established procedures for the work are communicated to all persons and identified for all work sites
  • 1.5 OHS, environmental and sustainable energy policies and procedures related to the work are identified to ensure safe systems of work are followed
  • 1.6 Relevant work permits are secured to coordinate the performance of work according to requirements and established procedures
  • 1.7 Resources including persons, equipment, tools and personal protective equipment required for the job are identified, scheduled, coordinated and confirmed in a safe and technical working order
  • 1.8 Clients are provided with possible solutions and options within the scope, acceptable cost and requirements
  • 1.9 Liaison and communication issues with authorised persons, authorities, clients and land owners are resolved and activities coordinated to carry out work
  • 1.10 Persons participating in the work, including plant operators and contractors are fully briefed and respective responsibilities coordinated and authorised where applicable in accordance with establish procedures
  • 1.11 Expenditure is forecast and managed to keep within operational budget constraints
2 Supervise during projects
  • 2.1 OHS policies and procedures and safe work practices are followed to eliminate or minimise incidents and hazards
  • 2.2 First Aid and other related work procedures are performed according to requirements and established procedures
  • 2.3 Equipment faults are identified through inspection and testing of operational equipment in accordance with a work schedule and to requirements
  • 2.4 Hazard warnings and safety signs are recognised and hazards assessed and OHS risks are reported to the immediate authorised persons for directions according to established procedures
  • 2.5 Fault finding and troubleshooting techniques are applied to operational systems and equipment to identify any repairs or maintenance that is required according to requirements and established procedures
  • 2.6 Essential Knowledge and Associated Skills are applied to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements
  • 2.7 Solutions to non-routine problems are identified and actioned, according to requirements, using acquired Essential Knowledge and Associated Skills
  • 2.8 Ongoing checks of quality of the work are undertaken in accordance with requirements and established procedures to ensure a quality outcome is achieved for the client and to a community and industry standards
  • 2.9 Relevant persons are informed of project status/requirements according to company standard operating procedures
3 Finalise completion details
  • 3.1 Work undertaken is checked against works schedule for conformance with requirements and anomalies which are reported and solutions identified in accordance with established procedures
  • 3.2 Accidents and injuries are reported and followed up in accordance with requirements and established procedures
  • 3.3 Work site is rehabilitated/cleaned up and confirmed safe and in accordance with established procedures
  • 3.4 Tools, equipment and any surplus resources and materials are where appropriate, cleaned, checked and returned to storage in accordance with established procedures
  • 3.5 Relevant work permit(s) are signed off in accordance with requirements
  • 3.6 Works completion records, reports as installed/modified drawing(s) and documentation and information is confirmed, processed and the appropriate persons notified
RANGE STATEMENT
10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.
This Unit shall be demonstrated in relation to supervising technical operations for gas distribution/transmission.
The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit:
Resources
Operational
Monitoring
Relevant personnel
Types of faults
Reports (5)
EVIDENCE GUIDE
9) The Evidence Guide forms an integral part of this Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment
9.1)


Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with industry and regulatory policy in this regard.
Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.
The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.
Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit
9.2)


Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines — UEG11’. Evidence shall also comprise:

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range

Apply sustainable energy principles and practices as specified in the Performance Criteria and range

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment

Demonstrate an appropriate level of employability skills

Conduct work observing the relevant Anti discrimination legislation, regulations, polices and workplace procedures

Demonstrate performance across a representative range of contexts from the prescribed items below:



Range of tools/equipment/procedures/workplace


Group No
The minimum number of items on which skill is to be demonstrated
Item List


A
At least 4
Resources:
Appropriate relevant personnel
Materials
Tools and equipment
Personal protective equipment and clothing
Company standard operating procedures
Equipment manuals
Training resources


B
At least 3
Project activities:
Maintenance, repairs and modifications
Construction and upgrade
Rectification of gas system faults
Installation and commissioning of New plant, piping and equipment
System security
Scheduling work


C
All
Legislative requirements:
OHS legislation
Relevant Government Acts, regulations and codes of practice
Australian standards
Environmental legislative requirements


D
At least 3
Relevant authorities:
Local and shire councils
Local government authorities
Road transport authorities
Rail departments
Landowners both current and traditional indigenous


E
At least 8
Gas system faults:
Gas leaks
Electrical problems
Mechanical failure
Out-of-current inspection status
Gauge failure, hose rupture/leaks
Instruments out of calibration
Non-flow of gas
Cathodic protection system failure
Corrosion
Compressor breakdown
Filtration problems
Gas measurement equipment inaccuracy/failure


F
At least 8
Relevant documentation:
Contracts, specifications
Drawings, plans
Manufacturer's specifications
Work permits
Company standard operation and safety procedures
Company management plans and policies
Hot work permits
Company forms and files
OHS laws and codes of practice
Relevant Government Acts, regulations and codes of practice
Environmental legislative requirements
Pipeline licenses
Quality assurance
Commercial agreements


G
At least 4
Records/reports:
Relevant documentation
Routine inspections (daily readings, monthly checks)
Scheduled maintenance activities
Mandatory or statutory inspections
Hazard and incident reports


H
All
Management techniques for Gas Industry supervision
Understanding the operation of Gas Industry equipment, tools and materials


I
At least one occasion
Deal with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment
9.3)


This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Unit.

Appropriate environmental regulation and work practices.

Appropriate organisational requirements.

Appropriate work environment, equipment and tools.

In addition to the resources listed above, in Context of and specific resources for assessment, evidence should show demonstrated competency in supervising technical operations for gas distribution/transmission.

Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment. Assessment must also integrate the employability skills.

Method of ssessment
9.4)

This Unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.

Note: Competent performance with inherent safe working practices is expected in the Industry to which this Unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the Essential Knowledge and Associated Skills described in this unit.

Concurrent assessment and relationship with other units
9.5)

There are no recommended concurrent assessments with this unit.
Replaced By
State Code National Code Title Type
OAD76 UEGNSG110 Supervise technical operations for gas distribution or transmission Unit of competency