Unit of competency Outline

Date retreived
22/07/2026 3:30 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and control wastewater sedimentation processes

Operate and control wastewater sedimentation processes

Unit of competency
National Code
NWPTRT073
State Code
AVX99
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
07/12/2015
State Implementation and Classification
Approved Date
15/04/2016
Field of Education
030717 - Plant And Machine Operations
Original Release Date
15/04/2016
Nominal Hours
20
Description
This unit describes the skills required to monitor and operate non-chemically assisted sedimentation processes within domestic and industrial wastewater treatment plants or stormwater systems. The required outcomes also include reporting on the sedimentation system performance and process quality control within these systems.This unit applies to those working as operational staff with responsibility for checking that sedimentation processes comply with organisational performance requirements.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work under supervision while performing routine tasks in a range of familiar contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for work
  • 1.1 Determine work requirements as outlined in the standard operating procedure.
  • 1.2 Select and check equipment required to meet safety requirements of task and site.
  • 1.3 Select, fit and use personal protective equipment.
2. Monitor and operate sedimentation processes
  • 2.1 Carry out sedimentation process inspections according to type of plant.
  • 2.2 Collect process samples and conduct standard tests.
  • 2.3 Monitor processes to maintain parameters of operation.
  • 2.5 Identify and report process faults and operational condition of plant.
  • 2.6 Carry out basic system adjustments to enhance system performance.
3. Complete documentation
  • 3.1 Collect and report process data.
  • 3.2 Report observations outside defined parameters for further action.
No information
No information
Replaces
State Code National Code Title Type
D1882 NWP271B Monitor, operate and report sedimentation processes Unit of competency
Replaced By
State Code National Code Title Type
OBN71 NWPTRT010 Operate and control sedimentation and clarification processes Unit of competency
State Code National Code Title Type
AYW4 NWP20115 Certificate II in Water Industry Operations Qualification