Unit of competency Outline

Date retreived
23/07/2026 5:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Plan and analyse LV electrical apparatus

Plan and analyse LV electrical apparatus

Unit of competency
National Code
UEEEL0079
State Code
OEE72
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
24/10/2022
View on TGA
State Implementation and Classification
Approved Date
10/02/2023
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
10/02/2023
Nominal Hours
54
Description
This unit covers planning and analysing the correct operation of single and three phase low voltage electrical apparatus. It covers planning their use in electrical installations, apparatus arrangements, and issues related to operation, characteristics, protection and solutions to apparatus problems.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to plan and analyse single and three phase low voltage electrical apparatus
  • 1.1 Work, health and safety (WHS) / occupational health and safety (OHS) risk control measures are identified and applied
  • 1.2 Apparatus to be analysed, and scope of work to be undertaken are identified and confirmed
  • 1.3 Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety
2 Plan and analyse single and three phase low voltage electrical apparatus
  • 2.1 Apparatus is confirmed as being isolated where necessary in accordance with WHS/OHS requirements
  • 2.2 Apparatus is analysed using measured and calculated values as they apply to single and three-phase low voltage apparatus
  • 2.3 Apparatus problems are identified from analysis and solutions for rectification are recommended
  • 2.4 The use of apparatus in a specified electrical installation is planned in accordance with requirements
3 Complete and document work
  • 3.1 Results of analysis are recorded
  • 3.2 Justification for apparatus selection and installation planning is documented
  • 3.3 Work completion is documented and stored in an appropriate location
No information
No information
No information
State Code National Code Title Type
BHZ3 UEE62122 Advanced Diploma of Engineering Technology - Electrical Qualification