Unit of competency Outline

Information current as of
21/10/2026 2:05 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace a recreational vehicle shower cubicle

Remove and replace a recreational vehicle shower cubicle

Unit of competency
National Code
MSMRV353
State Code
AWC11
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
15/12/2015
View on TGA
State Implementation and Classification
Approved Date
04/05/2016
Original Release Date
15/12/2015
Nominal Hours
24
Field of Education
030509 - Automotive Body Construction
Description
This unit of competency covers the skills and knowledge required to remove and replace the shower cubicle in a recreational vehicle. The same cubicle may be replaced, or the removed cubicle may be replaced with a different cubicle. The work will be carried out in a recreational vehicle service and repair facility.This unit of competency covers the preparation for, removal of, replacement of, and clean-up after the removal and replacement of a cubicle.The operator will be required to work to procedures, and follow plans/specifications, insurance requirements and customer needs. This unit of competency applies to an individual working alone or as part of a team/work group and working in liaison with other shift team members.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1 Plan the work
  • 1.1 Review the requirements of the work, including insurance requirements and customer needs
  • 1.2 Examine cubicle and determine what needs to be done and how to do it
  • 1.3 Check required tools and jigs are available at the worksite
  • 1.4 Check required materials and components are available at the worksite
  • 1.5 Identify any hazards and the related hazard controls
  • 1.6 Check that hazard controls are in place and operational
  • 1.7 Query any items that are different to usual and clarify requirements
2 Remove cubicle in accordance with devised procedures
  • 2.1 Use relevant hazard controls, including personal protective equipment (PPE)
  • 2.2 Remove cubicle maximising the potential for reuse
  • 2.3 Segregate and handle waste in accordance with procedures
  • 2.4 Temporarily store cubicle and components which are to be reused
3 Refurbish substructure as required
  • 3.1 Use relevant hazard controls, including PPE
  • 3.2 Examine exposed substructure
  • 3.3 Identify any additional damage revealed and decide how it can be made good
  • 3.4 Negotiate with customer over any changes in job scope and cost
  • 3.5 Make good/replace substructure as required
  • 3.6 Ensure substructure is fixed as appropriate
4 Replace cubicle in accordance with devised procedures
  • 4.1 Use relevant hazard controls, including PPE
  • 4.2 Replace cubicle in accordance with the devised procedure
  • 4.3 Trim as required
  • 4.4 Ensure cubicle is attached as required
  • 4.5 Seal cubicle as required
5 Finish removal and replacement of cubicle
  • 5.1 Check cubicle has been refitted correctly and make any required adjustments
  • 5.2 Clean up recreational vehicle and make ready for hand back to customer
  • 5.3 Clean up work area, leaving it ready for the next job
  • 5.4 Segregate and handle waste in accordance with procedures
  • 5.5 Complete any required documentation/records
No information
No information
No information