Unit of competency Outline
Date retreived
23/07/2026 5:58 AM AWST
23/07/2026 5:58 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Slice and trim leg - small stock
Slice and trim leg - small stock
Unit of competency
National Code
MTMP3054C
MTMP3054C
State Code
D8942
D8942
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
Field of Education
110105 - Butchery
Original Release Date
Nominal Hours
150
Description
This unit covers the skills and knowledge required to slice and trim relevant cuts of meat from small stock legs, including sheep, pigs, goats, game animals such as kangaroos, wallabies and other small stock processed for human consumption or pet meat.
Notes
Elements and Performance Criteria
1. Identify specifications for cuts
- 1.1. Specifications for cuts are determined using cut descriptions according to regulatory requirements, customer specifications and workplace requirements.
2. Slice and trim primary meat cuts
- 2.1. Primary meat cuts are sliced into finished meat cuts according to specifications and work instructions.
- 2.2. Occupational Health and Safety (OH&S) requirements are met including the safe and effective use of knives and safe manual handling techniques.
- 2.3. Dropped meat procedures are followed in accordance with workplace requirements.
3. Identify and remove defects
- 3.1. Defects are identified, removed and reported according to government regulations and workplace standards.
- 3.2. Persistent defects are reported to supervisor in accordance with work instructions.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Specifications may :
include
cutting lines
fat depth
length and weight ranges
muscle groups.
be derived from:
AUS-MEAT
customer requirements
fat trim depth
species
workplace requirements.
Regulatory requirements may include:
Export Control Act
relevant Australian Standards
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
state and territory regulations regarding meat processing.
Workplace requirements may include:
enterprise-specific requirements
hygiene and sanitation requirements
OH&S requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Communication skills may include:
listening and understanding
reading and interpreting workplace documentation
sharing information
speaking clearly and directly
working with diverse individuals and groups.
Small stock may include:
goats
kangaroos
pigs
sheep.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Specifications may :
include
cutting lines
fat depth
length and weight ranges
muscle groups.
be derived from:
AUS-MEAT
customer requirements
fat trim depth
species
workplace requirements.
Regulatory requirements may include:
Export Control Act
relevant Australian Standards
relevant regulations
requirements set out in AS 4696:2007 Australian Standard for Hygienic Production and Transportation of Meat and Meat Products for Human Consumption
state and territory regulations regarding meat processing.
Workplace requirements may include:
enterprise-specific requirements
hygiene and sanitation requirements
OH&S requirements
Quality Assurance (QA) requirements
Standard Operating Procedures (SOPs)
the ability to perform the task to production requirements
work instructions.
OH&S requirements may include:
enterprise OH&S policies, procedures and programs
OH&S legal requirements
Personal Protective Equipment (PPE) which may include:
coats and aprons
ear plugs or muffs
eye and facial protection
head-wear
lifting assistance
mesh aprons
protective boot covers
protective hand and arm covering
protective head and hair covering
uniforms
waterproof clothing
work, safety or waterproof footwear
requirements set out in standards and codes of practice.
Communication skills may include:
listening and understanding
reading and interpreting workplace documentation
sharing information
speaking clearly and directly
working with diverse individuals and groups.
Small stock may include:
goats
kangaroos
pigs
sheep.
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated at the normal rate of production for that plant.
Context of, and specific resources for assessment
Assessment must be conducted in an operating and registered meat processing plant or premises.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this unit of competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
The meat industry has specific and clear requirements for evidence. A minimum of three forms of evidence is required to demonstrate competency in the meat industry. This is specifically designed to provide evidence that covers the demonstration in the workplace of all aspects of competency over time.
These requirements are in addition to the requirements for valid, current, authentic and sufficient evidence.
Three forms of evidence means three different kinds of evidence - not three pieces of the same kind. In practice it will mean that most of the unit is covered twice. This increases the legitimacy of the evidence.
All assessment must be conducted against Australian meat industry standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Competency must be demonstrated at the normal rate of production for that plant.
Context of, and specific resources for assessment
Assessment must be conducted in an operating and registered meat processing plant or premises.
Method of assessment
Recommended methods of assessment include:
quiz of underpinning knowledge
workplace demonstration
workplace referee or third-party report of performance over time.
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality or Torres Strait Islander, gender, or language backgrounds other than English. Language and literacy demands of the assessment task should not be higher than those of the work role.
Guidance information for assessment
A current list of resources for this unit of competency is available from MINTRAC www.mintrac.com.au or telephone 1800 817 462.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W6704 | MTMP3054B | Slice and trim leg small stock | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAZ03 | AMPA3049 | Slice and trim leg - small stock | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D599 | MTM30111 | Certificate III in Meat Processing (Boning Room) | Qualification |
| D604 | MTM30611 | Certificate III in Meat Processing (General) | Qualification |