Unit of competency Outline

Date retreived
22/07/2026 8:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use digital imaging equipment in the field

Use digital imaging equipment in the field

Unit of competency
National Code
NWPNET063
State Code
OEJ32
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
07/12/2022
View on TGA
State Implementation and Classification
Approved Date
17/03/2023
Field of Education
030907 - Water And Sanitary Engineering
Original Release Date
17/03/2023
Nominal Hours
24
Description
This unit involves the skills and knowledge required to use digital imaging equipment in the field.It includes planning and preparing for work, locating and investigating infrastructure failures, cleaning up site and equipment, and finalising tasks.This unit applies to those using digital imaging equipment in the field, interpreting data and reporting infrastructure failures to relevant personnel. Those undertaking this unit would work independently under indirect supervision while performing routine tasks with a moderate level of complexity in familiar contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare work
  • 1.1 Determine work requirements from work instructions and pre-work inspections according to organisational requirements
  • 1.2 Identify hazards, assess risks and implement control measures
  • 1.3 Select and check equipment and personal protective equipment (PPE) to meet safety requirements of task and site
  • 1.4 Identify area of network main to be investigated and consult with plans to determine the work area
2 Locate and investigate infrastructure failure
  • 2.1 Identify pipe section containing infrastructure issues using digital imaging equipment
  • 2.2 Interpret data and report to relevant personnel
  • 2.3 Discuss planning and remediation activities
  • 2.4 Report findings according to workplace procedures, as required
3 Cleanup site and equipment and finalise tasks
  • 3.1 Inspect and check equipment for faults according to workplace procedures
  • 3.2 Dispose of waste materials according to workplace procedures, as required
  • 3.3 Restore the worksite according to workplace procedures
  • 3.4 Complete and submit workplace records according to workplace procedures
No information
No information
No information