Unit of competency Outline
Date retreived
22/07/2026 7:59 PM AWST
22/07/2026 7:59 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Check operational capability of sails and sail operating equipment
Check operational capability of sails and sail operating equipment
Unit of competency
National Code
MEM50007B
MEM50007B
State Code
W5343
W5343
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
29/01/2008
Field of Education
031701 - Maritime Engineering
Original Release Date
29/01/2008
Nominal Hours
18
Description
This unit covers conducting basic checks on vessel sail systems.
Notes
Elements and Performance Criteria
1. Inspect mast(s), boom(s), spars and fittings
- 1.1. Masts, booms and spars are inspected for security and integrity.
- 1.2. Fixed rigging is inspected for security and excessive corrosion.
- 1.3. Fittings and mountings are checked for security and excessive corrosion.
- 1.4. Reports of masts, booms, spars, rigging and fittings condition are completed on (any) approved workplace documentation and/or reported verbally.
2. Inspect sail condition
- 2.1. Sails are inspected for tears, rot and deterioration.
- 2.2. Sail runners, cleats and reinforcing points are inspected.
- 2.3. Reports of sails and fittings condition are completed on (any) approved workplace documentation and/or reported verbally.
- 2.4. Sails are correctly stowed after inspection.
- 2.5. Reports of sail condition are completed on (any) approved workplace documentation and/or reported verbally.
3. Check halyards, sheets, ropes and winches
- 3.1. Halyards, sheets, ropes, cables and winches are inspected for security and integrity.
- 3.2. Halyards, sheets, ropes and cables are secured and/or stowed correctly.
- 3.3. Winches and capstans are checked for operation, lubrication and condition.
- 3.4. Fittings and mountings are checked for security and condition.
- 3.5. Reports of sail control system condition are completed on (any) approved workplace documentation and/or reported verbally.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Masts, booms and spars
Wood, aluminium and composite materials
Halyards, sheets, ropes, cables and winches
Halyards, ropes, wires, cables, shackles, turning blocks, electric and hand powered winches, self-steer systems and self-furling sail systems
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Masts, booms and spars
Wood, aluminium and composite materials
Halyards, sheets, ropes, cables and winches
Halyards, ropes, wires, cables, shackles, turning blocks, electric and hand powered winches, self-steer systems and self-furling sail systems
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to conduct basic checks on the operational condition of vessel sails and fittings/equipment in or out of the water to the extent of providing a simple report to a supervisor or manager. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling associated with a marine environment, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifi-cations, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to conduct basic checks on the operational condition of vessel sails and fittings/equipment in or out of the water to the extent of providing a simple report to a supervisor or manager. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling associated with a marine environment, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifi-cations, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAS98 | MEM50007 | Check operational capability of sails and sail operating equipment | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W246 | MEM40205 | Certificate IV in Boating Services | Qualification |
| W244 | MEM30905 | Certificate III in Boating Services | Qualification |
| W232 | MEM10205 | Certificate I in Boating Services | Qualification |
| W235 | MEM20305 | Certificate II in Boating Services | Qualification |