Install anti-static resilient floor coverings

Unit of competency Outline

Date retreived
22/07/2026 8:47 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
MSFFL3019

State Code
WI376

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
1.00

Current Release Date
10/12/2013

View on TGA

State Implementation and Classification

Approved Date

19/06/2014

Field of Education

040321 - Floor Coverings

Original Release Date

19/06/2014

Nominal Hours

Description

This unit of competency covers installing anti-static resilient floor coverings, including preparation, cutting, laying and fixing.Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking flooring work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).

Notes

Elements and Performance Criteria

1 Prepare for installation

1.1 Applicable work health and safety (WHS), legislative and organisational requirements relevant to installing anti-static resilient floor coverings are verified and complied with
1.2 Instructions and/or plans are read and interpreted to identify the process required to complete work tasks
1.3 Sub-floor condition is assessed for suitability for installation of anti-static resilient floor covering
1.4 Suitable adhesives, trims and accessories are selected, if required
1.5 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition
1.6 Sequence of work is planned, including the starting point, to ensure efficiency and quality of installation

2 Set out materials

2.1 Anti-static resilient floor covering to be installed is checked against order
2.2 Anti-static resilient floor coverings are acclimatised according to manufacturer recommendations
2.3 Anti-static resilient floor coverings are organised and used in accordance with relevant safety management requirements
2.4 Working lines and starting point are established

3 Lay anti-static resilient flooring

3.1 Instructions and sequence for laying and fixing are followed
3.2 Anti-static resilient floor coverings are laid out to meet directional sequence, pattern match, specification requirements, and to minimise waste and joins as appropriate
3.3 Anti-static resilient flooring materials are accurately and clearly marked for cutting
3.4 Anti-static resilient flooring materials are cut to required shape ensuring minimum waste
3.5 Adhesives and edge strips/accessories are prepared for use as required
3.6 Anti-static resilient floor coverings for fixing are organised and used in accordance with relevant safety management requirements
3.7 Anti-static resilient floor covering is laid and fixed to meet job specifications
3.8 Anti-static resilient floor covering fixing methods and equipment are used following manufacturer recommendations
3.9 Completed installation is checked for flaws in installation and materials and faults rectified following workplace procedures

4 Complete housekeeping

4.1 Unused materials are stored or recycled as required
4.2 Tools and equipment are cleaned and stored appropriately
4.3 Work area is cleaned and rubbish disposed of appropriately
4.4 Workplace documentation is completed

No information

Replaced By

State Code	National Code	Title	Type
OAJ57	MSFFL3071	Install anti-static and conductive resilient floor coverings	Unit of competency

State Code	National Code	Title	Type
J736	MSF30813	Certificate III in Flooring Technology	Qualification