Unit of competency Outline

Date retreived
22/07/2026 9:56 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and maintain roadside fixtures

Install and maintain roadside fixtures

Unit of competency
National Code
RIICRC204D
State Code
WH111
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
24
Description
This unit describes a participant’s skills and knowledge required to install and maintain roadside fixtures in Civil Construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install and maintain roadside fixtures
  • 1.1 Access, interpret and apply roadside fixtures installation and maintenance documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear correct personal protective equipment appropriate for work activities
  • 1.5 Identify, obtain, confirm and implement signage requirements
  • 1.6 Select and check for faults all plant, tools and equipment to carry out tasks
2. Install guide posts and delineators
  • 2.1 Set out job to alignment and locations according to job drawings and specifications
  • 2.2 Excavate holes for poles to specification requirements
  • 2.3 Install guideposts to specification
  • 2.4 Install delineators to specification
3. Erect guardrails
  • 3.1 Set out position of guardrails according to drawings
  • 3.2 Finish guardrails according to specifications
  • 3.3 Erect and/or install guardrails in the correct location
4. Erect road fencing
  • 4.1 Set out fence line according to drawing and specifications and excavate positions of fence line and post hole
  • 4.2 Install fence posts plumb and to alignment
  • 4.3 Fit and fix rails, cladding mesh or panels
5. Repair roadside fixtures
  • 5.1 Identify roadside fixture faults and determine methods of repair
  • 5.2 Carry out repairs and routine maintenance
6. Maintain signs
  • 6.1 Maintain signs and support structures
  • 6.2 Carry out repairs
  • 6.3 Replace reflective patches in accordance with cyclic maintenance program
7. Clean up
  • 7.1 Clear work area and recycle or dispose of materials Store or stack unused materials
  • 7.2 Clean, check, maintain and store plant, tools and equipment
No information
No information
Replaces
State Code National Code Title Type
WB631 RIICRC204A Install and maintain roadside fixtures Unit of competency
Replaced By
State Code National Code Title Type
OCW99 RIICRC204E Install and maintain roadside fixtures Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification