Unit of competency Outline
Date retreived
22/07/2026 11:56 PM AWST
22/07/2026 11:56 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Monitor and control standards of accommodation
Monitor and control standards of accommodation
Unit of competency
National Code
LGAEHRR301B
LGAEHRR301B
State Code
C1956
C1956
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
14/08/2014
Field of Education
061303 - Environmental Health
Original Release Date
14/08/2014
Nominal Hours
40
Description
This unit covers the monitoring, inspection and control of accommodation to ensure the health and safety of occupants.
Notes
Elements and Performance Criteria
1. Assess suitability of proposed accommodation
- 1.1 Written or verbal communication between relevant parties is undertaken in a clear, concise manner.
- 1.2 Plans are approved by comparing details against legislation, codes of practice and council requirements.
- 1.3 Premises are inspected for compliance with approved plans.
- 1.4 Liaison is undertaken with other appropriate council departments and authorities or organisations to ensure relevant approvals are obtained.
- 1.5 Interpretations, assessments and judgements are made that maximise the functionality of premises within relevant legislative requirements and codes of practice.
2. Process applications for accommodation
- 2.1 Applications are checked for completeness, accuracy and payment of fees.
- 2.2 Inspection of premises is undertaken to ensure compliance with relevant legislation, codes of practice and council requirements.
- 2.3 Certificates of registration are checked prior to issue for accuracy, completeness and inclusion of appropriate conditions.
3. Undertake inspection of accommodation
- 3.1 Inspection schedules are established by ranking accommodation according to risk factors within legislation, codes of practice and council requirements.
- 3.2 Inspections are carried out in accordance with legislation, codes of practice and council requirements.
- 3.3 Accommodation standards are applied to an assessment of prescribed and non-prescribed premises to protect public health within the bounds of legislation and consumer expectations.
- 3.4 Reports to statutory authorities, council and proprietors of accommodation premises are prepared that show clear requirements to be met and identify works required to be undertaken within a specified time frame.
4. Investigate reports of inadequate dwelling standards
- 4.1 Accommodation investigations are identified from reports and assessments and prioritised according to risk factors.
- 4.2 An appropriate form of investigation is determined based on an assessment of the nature of the problem.
- 4.3 Investigation is carried out efficiently within priorities and regulatory and council requirements.
- 4.4 Data and information are collected using applicable procedures to determine the problem clearly.
- 4.5 Action on the accommodation problem is determined and undertaken to minimise the problem and the likelihood of recurrence.
- 4.6 After consultation with senior officers a report is prepared and submitted to the council for information or direction.
5. Act to recommend procedures for closure of a public building
- 5.1 Breaches of relevant legislation, council policy or standards relating to public building safety that represent an offence or a threat to public health are detected.
- 5.2 Information relating to an offence is collated through a review of existing documentation.
- 5.3 Additional information is obtained by interview and assessment to assist in substantiation of details of the offence.
- 5.4 A recommendation to proceed with prosecution, issue a warning or undertake no further action is forwarded to senior environmental staff and determined according to council resolution.
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.
Communication may include:
use of interpreter
written
oral
Council requirements may include:
council policies, procedures and guidelines
strategic, business and management plans
local ordinances, laws and by-laws
Legislative requirements may include:
federal
state or territory
local government
Inspections may include:
microwave oven testing
kitchens
air conditioning units
electric wiring
exit point signage
Accommodation may include:
prescribed
non-prescribed
boarding houses
hotels
hostels
residential dormitories
halls of residence
caravan parks
camping grounds
public places
domestic dwellings
flats
units
rental accommodation
Risk factors may include:
number of people accommodated
floor area
furniture
bedding
food hygiene
cleanliness
sanitation
facilities
infectious agents
transmission of illness
functionality
repair and maintenance
lighting
ventilation
fire safety
emergency access and egress
Statutory authorities may include:
department of planning
building control division
council
planning authorities
Communication may include:
use of interpreter
written
oral
Council requirements may include:
council policies, procedures and guidelines
strategic, business and management plans
local ordinances, laws and by-laws
Legislative requirements may include:
federal
state or territory
local government
Inspections may include:
microwave oven testing
kitchens
air conditioning units
electric wiring
exit point signage
Accommodation may include:
prescribed
non-prescribed
boarding houses
hotels
hostels
residential dormitories
halls of residence
caravan parks
camping grounds
public places
domestic dwellings
flats
units
rental accommodation
Risk factors may include:
number of people accommodated
floor area
furniture
bedding
food hygiene
cleanliness
sanitation
facilities
infectious agents
transmission of illness
functionality
repair and maintenance
lighting
ventilation
fire safety
emergency access and egress
Statutory authorities may include:
department of planning
building control division
council
planning authorities
Overview of assessment requirements
A person who demonstrates competency in this unit will be able to perform the outcomes described in the Elements to the required performance level detailed in the Performance Criteria. The knowledge and skill requirements described in the Range Statement must also be demonstrated. For example, knowledge of the legislative framework and safe work practices that underpin the performance of the unit are also required to be demonstrated.
Critical aspects of evidence to be considered
Risks to occupational health and safety are identified and resolved.
Context of assessment
On the job or in a simulated work environment.
Method of assessment
The following assessment methods are suggested:
observation of the learner performing a range of workplace tasks over sufficient time to demonstrate handling of a range of contingencies
written and/or oral questioning to assess knowledge and understanding
completing workplace documentation
third-party reports from experienced practitioners
completion of self-paced learning materials including personal reflection and feedback from trainer, coach or supervisor
Evidence required for demonstration of consistent performance
Competency must be demonstrated in all Elements across a range of variables relevant to council's size, location and strategic plan.
Resource implications
Access to a workplace or simulated case study that:
reflects examples of different accommodation premises and risk situations
provides information pertaining to relevant legislation, Australian standards, codes of practice and council guidelines and procedures
A person who demonstrates competency in this unit will be able to perform the outcomes described in the Elements to the required performance level detailed in the Performance Criteria. The knowledge and skill requirements described in the Range Statement must also be demonstrated. For example, knowledge of the legislative framework and safe work practices that underpin the performance of the unit are also required to be demonstrated.
Critical aspects of evidence to be considered
Risks to occupational health and safety are identified and resolved.
Context of assessment
On the job or in a simulated work environment.
Method of assessment
The following assessment methods are suggested:
observation of the learner performing a range of workplace tasks over sufficient time to demonstrate handling of a range of contingencies
written and/or oral questioning to assess knowledge and understanding
completing workplace documentation
third-party reports from experienced practitioners
completion of self-paced learning materials including personal reflection and feedback from trainer, coach or supervisor
Evidence required for demonstration of consistent performance
Competency must be demonstrated in all Elements across a range of variables relevant to council's size, location and strategic plan.
Resource implications
Access to a workplace or simulated case study that:
reflects examples of different accommodation premises and risk situations
provides information pertaining to relevant legislation, Australian standards, codes of practice and council guidelines and procedures
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| C4291 | LGAEHRR301A | Monitor and control standards of accommodation | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D348 | LGA40308 | Certificate IV in Local Government (Health and Environment) | Qualification |