Unit of competency Outline

Information current as of
19/10/2026 2:15 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use technical data relating to plant, tools, equipment and systems

Use technical data relating to plant, tools, equipment and systems

Unit of competency
National Code
AUMATK011
State Code
WH919
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Original Release Date
10/01/2014
Nominal Hours
40
Field of Education
030717 - Plant And Machine Operations
Description
This unit describes the performance outcomes required to interpret and apply information in plant, tool, equipment and system manuals, drawings and circuits when producing motor vehicles and components.It applies to those in an automotive and related component manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1. Source technical data
  • 1.1 Instructions and plans are read and interpreted to identify work area and related processes and materials
  • 1.2 Appropriate manuals, drawings and circuits are identified and accessed
  • 1.3 Amendment status of manuals, drawings and circuits is clearly established to ensure correct technical data is used
2. Interpret technical data
  • 2.1 Relevant sections of manuals, drawings and circuits are located in relation to the work to be carried out
  • 2.2 Information is interpreted and work procedures and processes to be followed are determined
3. Apply technical data
  • 3.1 Work is performed according to specified procedures and information in relevant sections of manuals, drawings and circuits, and work health and safety (WHS) procedures
  • 3.2 Sequencing of work is determined and applied in line with manuals, drawings and circuits
4. Store technical data
  • 4.1 Manuals, drawings and circuits are stored according to workplace procedures and to prevent damage
  • 4.2 Workplace documentation is completed according to workplace procedures
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification