Unit of competency Outline

Date retreived
22/07/2026 4:03 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rectify faults in drywall applications

Rectify faults in drywall applications

Unit of competency
National Code
CPCCPB3017
State Code
OCQ24
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040317 - Plastering
Original Release Date
01/06/2021
Nominal Hours
15
Description
This unit of competency specifies the skills and knowledge required to identify and rectify faults in drywall applications. It includes determining the causes of faults. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select and use personal protective equipment (PPE) for each stage of the task.
  • 1.4 Inspect work site, assess hazards and apply risk controls, including required signage and barricades.
  • 1.5 Select tools and equipment, check for serviceability and report any faults that may affect the safe operation of the equipment, tag equipment and set aside.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Identify faults, determine causes and recommend rectification.
  • 2.1 Identify, measure and describe faults in drywall applications using accurate construction industry terminology.
  • 2.2 Conduct investigation to establish cause of faults, in drywall applications.
  • 2.3 Plan processes to rectify faults achieve specified levels of finish.
3 Rectify faults.
  • 3.1 Follow planned rectification processes.
  • 3.2 Check that faults have been rectified to specifications.
No information
No information
Replaces
State Code National Code Title Type
W9457 CPCCPB3017A Rectify faults in plaster applications Unit of competency
State Code National Code Title Type
BGD5 CPC31220 Certificate III in Wall and Ceiling Lining Qualification