Unit of competency Outline

Date retreived
22/07/2026 7:28 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform operational inspections on remote operated systems

Perform operational inspections on remote operated systems

Unit of competency
National Code
AVIW0004
State Code
OBC52
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/08/2019
View on TGA
State Implementation and Classification
Approved Date
17/12/2019
Field of Education
031505 - Aircraft Operation
Original Release Date
17/12/2019
Nominal Hours
25
Description
This unit involves the skills and knowledge required to perform operational inspections on remote operated systems in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.It includes completing operational inspection administration, operational inspections, and performing and recording operational inspections.This unit addresses technical skill requirements (physical, mental and task-management abilities) related to equipment and system operations of remote system operations personnel and contributes to safe and effective performance in complex operational environments.Remote system operations are conducted as part of recreational, commercial and military activities across a variety of operational contexts within Australian industry.Work is performed independently or under limited supervision within a single-pilot or multi-crew remote operated system environment.Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1 Prepare charts and operational plan
  • 1.1 Suitable maps, charts and weather briefings for intended remote operation are selected and operations plan and geofencing set if required is prepared
  • 1.2 Pre-operational information and Notice to Airmen (NOTAM), or industry equivalent, is accessed, analysed and applied to operational plan
  • 1.3 Hazards are clearly indicated on charts and risk controls are implemented
  • 1.4 Effects of wind velocity, adverse environmental conditions and contingency actions are planned for
  • 1.5 Lost link profile and routing is prepared and validated
  • 1.6 Awareness of current and forecast weather conditions is maintained
2 Complete operational inspection administration
  • 2.1 Information about remote operated system is obtained, read and used to guide work as required
  • 2.2 Pre- and post-operational planning and documentation is completed
  • 2.3 Remote system operating weight and configuration is confirmed
  • 2.4 Pre- and post-operation technical release and remote system operation administration documentation is completed
  • 2.5 System serviceability is determined by approved technical inspection
  • 2.6 Certification of inspection for technical release is completed
3 Perform operational actions/ inspection
  • 3.1 Equipment and documentation are identified and accessible in accordance with regulatory requirements
  • 3.2 Internal and external checks are completed in accordance with approved system checklist
  • 3.3 Deployment administration tasks and communications are conducted
  • 3.4 Remote operated system is secured in accordance with manufacturer specifications and organisational procedures
4 Perform and record operational inspection
  • 4.1 Pre-operating inspection of remote operated system and ancillary equipment is performed in accordance with original equipment manufacturer (OEM) documentation and operations manual
  • 4.2 Appropriate actions are undertaken to rectify discrepancies and are recorded
  • 4.3 Pre-operating inspection is recorded in accordance with operations manual
No information
No information
Replaces
State Code National Code Title Type
AWP02 AVIW3037 Manage remote pilot aircraft systems pre- and post-flight actions Unit of competency
State Code National Code Title Type
BES9 AVI30419 Certificate III in Aviation (Remote Pilot) Qualification