Unit of competency Outline
Date retreived
21/07/2026 11:15 PM AWST
21/07/2026 11:15 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Construct registration rims
Construct registration rims
Unit of competency
National Code
HLTDT3A
HLTDT3A
State Code
C4999
C4999
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
04/04/2003
Field of Education
060705 - Dental Technology
Original Release Date
04/04/2003
Nominal Hours
28
Description
Notes
Elements and Performance Criteria
No information
Appropriate materials for base may include:
Wax
Thermoformed materials
Light cured composites
Acrylic
Cast metal framework
Wax
Thermoformed materials
Light cured composites
Acrylic
Cast metal framework
Critical aspects of assessment:
The unit should be assessed over a range of jaw class relationships. Registration rims must be suitable for use in the mouth.
All work complies with relevant legislative requirements.
Underpinning knowledge:
Relevant material science for carrying out procedures
Anatomy of the head and neck
Range of standard dimensions
Application of registration rims
Underpinning skills:
Manual dexterity
Processing techniques
Accuracy of measurements
Neatness
Planning of work
Interdependent assessment of units:
This unit may be assessed with other units making up a job role:
HLTIN1A Comply with infection control policies and procedures is a pre-requisite unit.
Resource implications:
This unit should be assessed by direct observation at work or through simulation. A simulated environment must contain all necessary equipment.
The unit should be assessed over a range of jaw class relationships. Registration rims must be suitable for use in the mouth.
All work complies with relevant legislative requirements.
Underpinning knowledge:
Relevant material science for carrying out procedures
Anatomy of the head and neck
Range of standard dimensions
Application of registration rims
Underpinning skills:
Manual dexterity
Processing techniques
Accuracy of measurements
Neatness
Planning of work
Interdependent assessment of units:
This unit may be assessed with other units making up a job role:
HLTIN1A Comply with infection control policies and procedures is a pre-requisite unit.
Resource implications:
This unit should be assessed by direct observation at work or through simulation. A simulated environment must contain all necessary equipment.
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| C9188 | HLTDT303B | Construct registration rims | Unit of competency |
| D8182 | HLTDT303C | Construct registration rims | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| C449 | HLT50502 | Diploma of Dental Technology | Qualification |
| 6858 | 51179 | Certificate IV in Dental Technology | Accredited course |