Elements and Performance Criteria

This competency unit includes the processes required to assemble and finish, including alignment to ensure appearance is as required and surface quality meets specifications. It includes the operation of all relevant additional equipment where that equipment is integral to the finishing process.

Procedures means all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.

This competency includes equipment and tools such as:
hand finishing tools, scrapers, sandpaper, buffs and polishes
power tools (including drills and routers)
supporting fixtures and jigs
relevant personal protective equipment.

Typical finishing processes include:
joining
fairing
repairing faults.

Typical materials include:
glues, solvents, sealers
nuts and bolts, rivets, and other fasteners.

Typical hazards include:
dusts/vapours
hazardous substances
moving equipment
manual handling hazards.

Typical problems include:
product or components warped
surface defects
equipment wear and breakage
over use of tools, requiring rework.

All operations are performed in accordance with procedures.

Essential knowledge and enterprise requirements:
Application of knowledge of the materials, equipment and process sufficient to recognise out of specification products, process problems and materials faults.
Knowledge of the enterprise's procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.

Competence includes the ability for the practical completion of the job to:
apply and/or explain:
requirements of completed product
application of joining process
fairing process
surface finish measurement techniques
measurements required to meet specifications
production workflow sequences and materials demand
approved hazard control and safety procedures and the use of PPE in relation to handling materials, equipment operation and cleanup
potential effects of variations in raw materials and equipment operation in relation to quality of product
waste management and importance of reusing non-conforming products wherever possible
correct selection and use of equipment, materials, processes and procedures
plan own work including predicting consequences and identifying improvements
monitor equipment operation and product quality
identify when the operator is able to rectify faults, when assistance is required and who is the appropriate source for assistance
identify and describe own role and role of others involved directly in the process
identify factors which may affect product quality or production output and appropriate remedies
use PPE, safely handle products and materials, read relevant safety information and apply safety precautions appropriate to the task
distinguish between possible causes of routine finishing faults such as:
incorrect quantity of materials
contaminated materials/additives
wrong raw materials/additives
incorrect quantity of materials/additives.

Critical aspects
It is essential that competence is demonstrated in the ability to:
recognise the importance of material properties and qualities
apply approved procedures
take appropriate action to resolve faults or report faults to appropriate personnel.

Consistent performance should be demonstrated. In particular look to see that:
finishing production standards are met consistently
upstream and downstream communication is timely and effective
operating procedures and work instructions are read and interpreted correctly
problems are identified and appropriate action is taken (i.e., the problem is fixed or reported)
all safety procedures are followed.

Language, literacy and numeracy requirements
This unit requires the ability to read and interpret typical product specifications, job sheets, procedures, material labels and safety information as provided to operators.
Writing is required to the level of completing workplace forms.
Basic numeracy is required, eg, to determine that two 25 kg bags are needed to make up a requirement for 50 kg.

Assessment method and context
Competence in this unit may be assessed:
on an operating plant allowing for operation under all normal and a range of abnormal conditions
by use of a suitable simulation and/or a range of case studies/scenarios
by a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and that the theoretical assessment will be combined with appropriate practical/simulation or similar assessment.

Resource implications
This section should be read in conjunction with the range of variables for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.