Unit of competency Outline

Date retreived
23/07/2026 4:17 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Employ power tools in an underwater environment

Employ power tools in an underwater environment

Unit of competency
National Code
DEFWDV010
State Code
BBC79
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
17/08/2017
View on TGA
State Implementation and Classification
Approved Date
21/02/2018
Field of Education
031799 - Maritime Engineering And Technology, N.e.c.
Original Release Date
21/02/2018
Nominal Hours
0
Description
This unit specifies the skills and knowledge required to use power tools in an underwater environment.It includes operating a compressor, selecting appropriate tools for work task, inspecting them for serviceability and deservicing and storing tools. It also includes recovering waste arising from work task.This unit relates, in part, to existing standards in the Australian Diver Accreditation Scheme (ADAS).This unit applies to persons working as Defence Divers but is applicable to all individuals who work in this field.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Persons undertaking this unit work independently and perform specific tasks in a range of contexts that could be unpredictable.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to use power tools under water
  • 1.1 Determine specific requirements for power tools in accordance with work task, worksite and work object requirements
  • 1.2 Develop a work plan consistent with dive plan
  • 1.3 Select and inspect power tools, protective equipment and compressor to meet task requirements
  • 1.4 Secure power tools, compressor, and associated leads and hoses for transport to/from dive site
  • 1.5 Assess access obstructions and other hazards, and manage risks as required
2 Operate power tools under water
  • 2.1 Secure power tools on self during dive for ease of accessibility, and lack of interference with mobility and dive equipment
  • 2.2 Determine safe route for leads and hoses for dive activity
  • 2.3 Determine work safe area and location and confirm safety of divers prior to commencing work task/s
  • 2.4 Operate power tools underwater ensuring management of their associated hazards
  • 2.5 Conduct operator maintenance at worksite on power tools, leads and hoses, as required
  • 2.6 Disconnect power tools temporarily and render safe to evaluate work task in accordance with operational procedures
3 Operate compressor
  • 3.1 Perform pre-start checks and connect hoses and leads in accordance with manufacturer instructions
  • 3.2 Develop pressure gradually without surging and stabilise compressor to establish required output
  • 3.3 Conduct routine operational checks, and diagnose and address any warning signs
  • 3.4 Shut down compressor or conduct an emergency shut down procedure in accordance with dive plan
4 Conclude power tool operations
  • 4.1 Minimise environmental impact arising from use of power tools and recover waste products in accordance with operational procedures
  • 4.2 Undertake activity to de-service equipment and compressor after use
  • 4.3 Complete equipment log book/s, as required
No information
No information
Replaces
State Code National Code Title Type
AVV11 DEFDV010B Employ power tools in an underwater environment Unit of competency
Replaced By
State Code National Code Title Type
OEE34 DEFWDV030 Employ power tools in an underwater environment Unit of competency
No information