Unit of competency Outline
Date retreived
23/07/2026 9:39 AM AWST
23/07/2026 9:39 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Manufacture pallets using manual methods
Manufacture pallets using manual methods
Unit of competency
National Code
TLIW2023A
TLIW2023A
State Code
D5375
D5375
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
31/10/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
31/10/2014
Nominal Hours
20
Description
This unit involves the skills and knowledge required to manufacture pallets using manual methods including planning the production of pallets, setting up manual pallet production processes, undertaking manual production of pallets, and completing operations in accordance with workplace requirements. Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1Plan production of pallets
- 1.1 Pallet design is identified from order in accordance with workplace procedures
- 1.2 Components are identified from drawings or instructions
- 1.3 Number of components and quantity of timber necessary to complete order are calculated
- 1.4 Arrangements are made for supply and cutting of boards and components
- 1.5 Pallet assembly jig is selected to suit pallet design
- 1.6 Brand requirements are identified from drawings or instructions and suitable stencils are selected
- 1.7 Communication with supervisor and other workers is maintained to ensure efficient work flow
2Set up pallet production
- 2.1 Appropriate workplace occupational health and safety and other regulatory procedures are followed
- 2.2 Personal protective equipment is selected and worn
- 2.3 Equipment and components are brought to assembly area
- 2.4 Components are inspected for compliance with workplace quality standards
- 2.5 Paint and painting equipment is prepared and tested
3Undertake manual production of pallets
- 3.1 Components are checked for fit to assembly jig and a trial pallet is constructed to specifications in accordance with workplace procedures
- 3.2 Trial pallet is checked for conformity in accordance with workplace quality standards
- 3.3 Required number of pallets is constructed in accordance with workplace procedures
- 3.4 Faults/problems with equipment or components are identified and appropriate action is undertaken
- 3.5 Pallets are painted and stencilled to order in accordance with work specifications
4Complete operations
- 4.1 Pallets are inspected and located to holding area without damage to pallet, personnel or equipment
- 4.2 Off-cuts, rejected boards and waste materials are directed for waste or recovery in accordance with workplace policy and procedures
- 4.3 Equipment is maintained and stored in designated areas
- 4.4 Documentation is completed in accordance with workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Work may be conducted:
in a range of work environments by day or night and may cover the full range of standard wooden designs manufactured in the workplace concerned
Customers may be:
internal or external
Workplaces may comprise:
large, medium or small worksites
Workplace environment may include:
movement of equipment, goods, products, materials and vehicular traffic
The manual pallet production process is conducted:
as part of manufacture/repair activities with the operator using discretion and judgement within established specifications
Equipment used may include:
assembly jig
nail gun
compressor or compressed air supply
paint spray gun
OH&S requirements include:
manual handling, protective clothing, elimination/control of hazards, machine isolation and machine guarding
Hazards in the work area may include exposure to:
chemicals
dangerous or hazardous substances
stationary and moving equipment, parts and materials
noise, light, energy sources
electrical equipment
humidity, air temperature, radiant heat
debris on floor
faulty racking
poorly stacked materials or finished pallets
faulty tools and equipment
Personal protective equipment may include:
gloves
safety headwear and footwear
safety glasses
respirators
protective clothing
Consultative processes may involve:
workplace personnel
supervisors and managers
customers/clients
suppliers
contractors
union representatives
industrial relations and OH&S specialists
other professional or technical staff
Communication in the work area may include:
phone
fax
email
internet
barcode readers
oral, aural or signed communications
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established or standard procedures
Information/documents may include:
job specifications and workplace operating procedures
relevant Australian or international standards
manufacturers specifications for equipment/tools
supplier and/or client instructions
quality assurance standards for pallet manufacture
material safety data sheets (where applicable)
codes of practice including the National Standards for Manual Handling and the Industry Safety Code
relevant regulations including the ADG Code
award, enterprise bargaining agreement, other industrial arrangements
standards and certification requirements
emergency procedures
Applicable regulations and legislation may include:
relevant codes and regulations pertaining to pallet manufacture
Australian Standards AS 2858 and AS 2082
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
licence, patent or copyright arrangements
ADG Code and regulations
workplace relations regulations including equal opportunity, equal employment opportunity and affirmative action legislation
workers compensation regulations
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Work may be conducted:
in a range of work environments by day or night and may cover the full range of standard wooden designs manufactured in the workplace concerned
Customers may be:
internal or external
Workplaces may comprise:
large, medium or small worksites
Workplace environment may include:
movement of equipment, goods, products, materials and vehicular traffic
The manual pallet production process is conducted:
as part of manufacture/repair activities with the operator using discretion and judgement within established specifications
Equipment used may include:
assembly jig
nail gun
compressor or compressed air supply
paint spray gun
OH&S requirements include:
manual handling, protective clothing, elimination/control of hazards, machine isolation and machine guarding
Hazards in the work area may include exposure to:
chemicals
dangerous or hazardous substances
stationary and moving equipment, parts and materials
noise, light, energy sources
electrical equipment
humidity, air temperature, radiant heat
debris on floor
faulty racking
poorly stacked materials or finished pallets
faulty tools and equipment
Personal protective equipment may include:
gloves
safety headwear and footwear
safety glasses
respirators
protective clothing
Consultative processes may involve:
workplace personnel
supervisors and managers
customers/clients
suppliers
contractors
union representatives
industrial relations and OH&S specialists
other professional or technical staff
Communication in the work area may include:
phone
fax
internet
barcode readers
oral, aural or signed communications
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established or standard procedures
Information/documents may include:
job specifications and workplace operating procedures
relevant Australian or international standards
manufacturers specifications for equipment/tools
supplier and/or client instructions
quality assurance standards for pallet manufacture
material safety data sheets (where applicable)
codes of practice including the National Standards for Manual Handling and the Industry Safety Code
relevant regulations including the ADG Code
award, enterprise bargaining agreement, other industrial arrangements
standards and certification requirements
emergency procedures
Applicable regulations and legislation may include:
relevant codes and regulations pertaining to pallet manufacture
Australian Standards AS 2858 and AS 2082
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
licence, patent or copyright arrangements
ADG Code and regulations
workplace relations regulations including equal opportunity, equal employment opportunity and affirmative action legislation
workers compensation regulations
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWL19 | TLIW2023 | Manufacture pallets using manual methods | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W917 | TLI21610 | Certificate II in Warehousing Operations | Qualification |