Unit of competency Outline

Date retreived
22/07/2026 1:44 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and maintain vent

Install and maintain vent

Unit of competency
National Code
RIIUMM202D
State Code
WH701
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
30
Description
This unit describes a participant’s skills and knowledge required to install and maintain vent in Metalliferous mining.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for the installation of ventilation systems
  • 1.1. Access, interpret and apply installation of ventilation systems documentation, and ensure the work activity is compliant
  • 1.2. Obtain, interpret, clarify and confirm work instructions
  • 1.3. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
  • 1.4. Select, and check for faults, equipment/tools for the activity
  • 1.5. Inspect and assess site conditions and determine if scaling is required
  • 1.6. Conduct equipment pre-start checks and start up procedures
  • 1.7. Identify, address and report environmental issues, potential risks and hazards
  • 1.8. Communicate with other equipment operators and personnel using approved communication methods
  • 1.9. Use approved dust suppression and extraction equipment/methods
  • 1.10. Ensure work area is ventilated before entry
2. Install and maintain vent
  • 2.1. Isolate and lock out ventilation devices
  • 2.2. Install and test catenary cable or secure to existing ground support mechanisms where appropriate
  • 2.3. Hang and secure ventilation bag
  • 2.4. Check vent for correct operation and replace and/or adjust vent if required
3. Remove vent
  • 3.1. Isolate and lock out ventilation devices
  • 3.2. Loosen and disconnect vent support mechanisms
  • 3.3. Remove vent whilst ensuring the safety of personnel and associated equipment and services
  • 3.4. Seal any reticulation system openings correctly to minimise entry of foreign material
4. Conduct housekeeping activities
  • 4.1. Clear work area and dispose of or recycle materials
  • 4.2. Clean and maintain condition of equipment, ensure suitability for use, and address/report issues
  • 4.3. Manage and/or report hazards, and maintain a safe working environment
  • 4.4. Process and maintain written records
No information
No information
Replaces
State Code National Code Title Type
WB701 RIIUMM202A Install and maintain vent Unit of competency