Unit of competency Outline

Date retreived
22/07/2026 11:30 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Program and configure networked security systems

Program and configure networked security systems

Unit of competency
National Code
CPPSEC4018
State Code
OBI69
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/09/2019
View on TGA
State Implementation and Classification
Approved Date
20/05/2020
Field of Education
029901 - Security Science
Original Release Date
20/05/2020
Nominal Hours
20
Description
This unit specifies the skills and knowledge required to program and configure a range of security systems and networks. It includes identifying configuration requirements and parameters for the type of security system and network, and conducting programming, configurations and testing to ensure the system operates correctly and meets client requirements.This unit is suitable for those using specialised knowledge to complete routine and non-routine tasks and using their own judgement to deal with predictable and sometimes unpredictable problems.Legislative, regulatory or certification requirements apply in some states and territories to the provision of advice on security solutions, strategies, protocols and procedures. For further information, check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1 Confirm security system and network requirements.
  • 1.1 Access and interpret key requirements of legislation, regulations and workplace policies and procedures, including work health and safety (WHS), and apply to work instructions to ensure compliance.
  • 1.2 Review work instructions to confirm client requirements and work timeframes.
  • 1.3 Obtain and confirm security system installation specifications and network configurations.
  • 1.4 Review installation documentation to confirm equipment, cabling and connection requirements.
  • 1.5 Check proposed configurations against operational parameters and specifications for security system and type of network.
2 Plan and organise work tasks.
  • 2.1 Plan and prioritise work tasks allowing sufficient time to meet work instructions.
  • 2.2 Select and organise required materials, tools, testing devices and equipment including personal protective equipment and check for safe and correct operation.
  • 2.3 Arrange access to security system and network in consultation with relevant persons.
  • 2.4 Identify hazards in the work area and apply risk control measures.
3 Conduct system and network programming and configuration.
  • 3.1 Access networked security system with minimal disruption to services and others in the work area.
  • 3.2 Use safe work practices when working with electronic equipment and cables according to WHS requirements.
  • 3.3 Assess security system design and existing infrastructure to identify and verify program parameters.
  • 3.4 Install and program system software according to manufacturers’ instructions.
  • 3.5 Configure and secure networked security system according to work instructions.
4 Inspect and test network configurations.
  • 4.1 Test networked security system to confirm correct configuration, operation and connections.
  • 4.2 Inspect networked security system configuration and confirm compliance with regulatory and client requirements.
  • 4.3 Identify and rectify or report configuration faults or deficiencies.
5 Finalise work tasks and complete documentation.
  • 5.1 Notify completion of work to relevant persons.
  • 5.2 Complete documentation detailing work undertaken and identified faults or deficiencies according to workplace and regulatory requirements.
  • 5.3 Check tools and equipment for faults, wear or damage and rectify or report problems.
  • 5.4 Restore work area to original condition and remove waste caused by work tasks.
No information
No information
Replaces
State Code National Code Title Type
D1468 CPPSEC4018A Configure security devices on IT networks Unit of competency
State Code National Code Title Type
BEW9 CPP40719 Certificate IV in Security Management Qualification
BEW8 CPP41519 Certificate IV in Security Risk Analysis Qualification