Unit of competency Outline

Date retreived
22/07/2026 5:31 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install jet drive propulsion systems

Install jet drive propulsion systems

Unit of competency
National Code
AURR314131B
State Code
D7657
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
031701 - Maritime Engineering
Original Release Date
12/10/2011
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to install and commission jet drive propulsion systems and associated components on vessels.It requires the ability to identify and confirm work requirements, prepare for, install and commission inboard jet drive propulsion systems and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices, applicable to the work
  • 1.3. Source installation procedures and relevant workshop manuals and manufacturer information
  • 1.4. Determine installation method in accordance with OHS, environmental and industry regulations, and guidelines and enterprise procedures
  • 1.5. Set up work area
2. Install and commission jet drive propulsion system and associated components
  • 2.1. Carry out jet drive propulsion system installation in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 2.2. Test jet drive propulsion system for correct operation, make required adjustments and re-test
  • 2.3. Commission jet drive propulsion system
  • 2.4. Check that protective guards, cowlings and safety features are in place according to workplace expectations
  • 2.5. Determine the need for water testing of vessel's jet drive propulsion system
3. Clean up work area and maintain equipment
  • 3.1. Make final inspection of jet drive propulsion system
  • 3.2. Clean and inspect equipment and tooling according to workplace requirements
  • 3.3. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 3.4. Finalise and process work completion documentation, update customer and warranty information and give to appropriate persons as required
  • 3.5. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W2939 AURR314131A Install jet drive propulsion systems Unit of competency
Replaced By
State Code National Code Title Type
WF339 AURRTQ3005 Install jet drive propulsion systems Unit of competency
State Code National Code Title Type
D541 AUR30511 Certificate III in Marine Qualification